您好,欢迎来到知芯网
  • 封装:48-TFSOP(0.173",4.40mm 宽)
  • RoHS:无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式:Digi-Reel®
  • 参考价格:$2.52-$5.04

更新日期:2024-04-01

产品简介:具有可配置电压转换的汽车类 16 位双电源总线收发器

查看详情
  • 封装:48-TFSOP(0.173",4.40mm 宽)
  • RoHS:无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式:Digi-Reel®
  • 参考价格:$2.52-$5.04

CAVC16T245QDGVRQ1 供应商

  • 公司
  • 型号
  • 品牌
  • 封装/批号
  • 数量
  • 地区
  • 日期
  • 说明
  • 询价

CAVC16T245QDGVRQ1 中文资料属性参数

  • 标准包装:1
  • 类别:集成电路 (IC)
  • 家庭:逻辑 - 变换器
  • 系列:74AVC
  • 逻辑功能:变换器,双向,3 态
  • 位数:16
  • 输入类型:逻辑
  • 输出类型:逻辑
  • 数据速率:380Mbps
  • 通道数:2
  • 输出/通道数目:8
  • 差分 - 输入:输出:无/无
  • 传输延迟(最大):5.7ns
  • 电源电压:1.2 V ~ 3.6 V
  • 工作温度:-40°C ~ 125°C
  • 封装/外壳:48-TFSOP(0.173",4.40mm 宽)
  • 供应商设备封装:48-TVSOP
  • 包装:®
  • 其它名称:296-23876-6

产品特性

  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results: Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range Device HBM ESD Classification Level H3B (JESD 22 A114-A) Device CDM ESD Classification Level C5 (JESD 22 C101)
  • Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
  • Device HBM ESD Classification Level H3B (JESD 22 A114-A)
  • Device CDM ESD Classification Level C5 (JESD 22 C101)
  • Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage
  • VCC Isolation Feature – If Either VCC Input is at GND, Both Ports Are in the High-Impedance State
  • Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.2V to 3.6V Power-Supply Range
  • Ioff Supports Partial-Power-Down Mode Operation
  • I/Os Are 4.6V Tolerant
  • Maximum Data Rates 380Mbps (1.8V to 3.3V Translation) 200Mbps (<1.8V to 3.3V Translation) 200Mbps (Translate to 2.5V or 1.8V) 150Mbps (Translate to 1.5V) 100Mbps (Translate to 1.2V)
  • 380Mbps (1.8V to 3.3V Translation)
  • 200Mbps (<1.8V to 3.3V Translation)
  • 200Mbps (Translate to 2.5V or 1.8V)
  • 150Mbps (Translate to 1.5V)
  • 100Mbps (Translate to 1.2V)
  • Latch-Up Performance Exceeds 100mA Per JESD 78, Class II

产品概述

The SN74AVC16T245-Q1 is a 16-bit noninverting bus transceiver that uses two separate configurable power-supply rails. The SN74AVC16T245-Q1 is optimized to operate with VCCA or VCCB set at 1.4V to 3.6V. It is operational with VCCA or VCCB as low as 1.2V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2V to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2V to 3.6V. This allows for universal low-voltage bidirectional translation between any of the 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V voltage nodes.The SN74AVC16T245-Q1 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable ( OE) input can be used to disable the outputs so the buses effectively are isolated.

IC 索引: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9