您好，欢迎来到知芯网
搜索
热门搜索：
发布采购

TAS5602DCAR

Texas Instruments 线性 - 音頻放大器
  • 封装：56-TFSOP（0.240"，6.10mm 宽）裸露焊盘
  • RoHS：无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式：Digi-Reel®
  • 参考价格：$2.88-$5.76

更新日期：2024-04-01

TAS5602DCAR

Texas Instruments 线性 - 音頻放大器

产品简介：20W 立体声、10V 至 26V 电源电压、PWM 输入 D 级音频放大器

查看详情
  • 封装：56-TFSOP（0.240"，6.10mm 宽）裸露焊盘
  • RoHS：无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式：Digi-Reel®
  • 参考价格：$2.88-$5.76

TAS5602DCAR 供应商

  • 公司
  • 型号
  • 品牌
  • 封装/批号
  • 数量
  • 地区
  • 日期
  • 说明
  • 询价

TAS5602DCAR 中文资料属性参数

  • 标准包装：1
  • 类别：集成电路 (IC)
  • 家庭：线性 - 音頻放大器
  • 系列：-
  • 类型：D 类
  • 输出类型：2-通道（立体声）或 4 通道（四路）
  • 在某负载时最大输出功率 x 通道数量：20W x 2 @ 8 欧姆; 19W x 4 @ 4 欧姆
  • 电源电压：10 V ~ 26 V
  • 特点：数字 PWM 输入，短路和热保护
  • 安装类型：表面贴装
  • 供应商设备封装：56-HTSSOP
  • 封装/外壳：56-TFSOP（0.240"，6.10mm 宽）裸露焊盘
  • 包装：®
  • 其它名称：296-23533-6

产品特性

  • Supports Multiple Output Configurations2×20-W into a 8-Ω BTL Load at 18 V 4×10-W into a 4-Ω SE Load at 18 V 2×10W (SE) + 1×20W (BTL) at 18 V
  • 2×20-W into a 8-Ω BTL Load at 18 V
  • 4×10-W into a 4-Ω SE Load at 18 V
  • 2×10W (SE) + 1×20W (BTL) at 18 V
  • Thermally Enhanced PackageDCA (56-pin HTTSOP)
  • DCA (56-pin HTTSOP)
  • Wide Voltage Range: 10V—26VNo Separate Supply Required for Gate Drive
  • No Separate Supply Required for Gate Drive
  • Efficient Class-D Operation Eliminates Need for Heat Sinks
  • Closed Loop Power Stage ArchitectureImproved PSRR Reduces Power Supply Performance RequirementsHigh Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass ResponseConstant Output Power Over Variation in Supply Voltage
  • Improved PSRR Reduces Power Supply Performance Requirements
  • High Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
  • Constant Output Power Over Variation in Supply Voltage
  • Single Ended Inputs
  • Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, and Short Circuit With Error Reporting
  • APPLICATIONSFlat-Panel, Rear-Projection, and CRT TVConsumer Audio Applications
  • Flat-Panel, Rear-Projection, and CRT TV
  • Consumer Audio Applications

产品概述

The TAS5602 is a 20-W (per channel) efficient, stereo digital amplifier power stage for driving 4 single-ended speakers, 2 bridge-tied speakers, or combination of single and bridge-tied loads. The TAS5602 can drive a speaker with an impedance as low as 4Ω. The high efficiency of the TAS5602 eliminates the need for an external heat sink.A simple interface to a digital audio PWM processor is shown below. The TAS5602 is fully protected against faults with short-circuit protection and thermal protection as well as overvoltage and undervoltage protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.
查看全部

TAS5602DCAR 相关产品

IC 索引： A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9