您好，欢迎来到知芯网
搜索
热门搜索：
发布采购

TAS5601DCA

Texas Instruments 线性 - 音頻放大器
  • 封装：56-TFSOP（0.240"，6.10mm 宽）裸露焊盘
  • RoHS：无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式：管件
  • 参考价格：$4.469

更新日期：2024-04-01

TAS5601DCA

Texas Instruments 线性 - 音頻放大器

产品简介：20W 立体声、10V 至 26V 电源电压、PWM 单端输入 D 级音频放大器

查看详情
  • 封装：56-TFSOP（0.240"，6.10mm 宽）裸露焊盘
  • RoHS：无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式：管件
  • 参考价格：$4.469

TAS5601DCA 供应商

  • 公司
  • 型号
  • 品牌
  • 封装/批号
  • 数量
  • 地区
  • 日期
  • 说明
  • 询价

TAS5601DCA 中文资料属性参数

  • 标准包装：35
  • 类别：集成电路 (IC)
  • 家庭：线性 - 音頻放大器
  • 系列：-
  • 类型：D 类
  • 输出类型：2-通道（立体声）或 4 通道（四路）
  • 在某负载时最大输出功率 x 通道数量：20W x 2 @ 8 欧姆; 19W x 4 @ 4 欧姆
  • 电源电压：10 V ~ 26 V
  • 特点：数字 PWM 输入，短路和热保护
  • 安装类型：表面贴装
  • 供应商设备封装：56-HTSSOP
  • 封装/外壳：56-TFSOP（0.240"，6.10mm 宽）裸露焊盘
  • 包装：管件
  • 配用：TAS5601EVM4-ND - TAS5601EVM4

产品特性

  • Supports Multiple Output Configurations2×20-W into a 8-Ω BTL Load at 18 V 4×10-W into a 4-Ω SE Load at 18 V 2×10W (SE) + 1×20W (BTL) at 18 V
  • 2×20-W into a 8-Ω BTL Load at 18 V
  • 4×10-W into a 4-Ω SE Load at 18 V
  • 2×10W (SE) + 1×20W (BTL) at 18 V
  • Thermally Enhanced PackageDCA (56-pin HTTSOP)
  • DCA (56-pin HTTSOP)
  • Wide Voltage Range: 10V—26VNo Separate Supply Required for Gate Drive
  • No Separate Supply Required for Gate Drive
  • Efficient Class-D Operation Eliminates Need for Heat Sinks
  • Closed Loop Power Stage ArchitectureImproved PSRR Reduces Power Supply Performance RequirementsHigh Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass ResponseConstant Output Power Over Variation in Supply Voltage
  • Improved PSRR Reduces Power Supply Performance Requirements
  • High Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
  • Constant Output Power Over Variation in Supply Voltage
  • Differential Inputs
  • Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, and Short Circuit With Error Reporting
  • APPLICATIONSFlat-Panel, Rear-Projection, and CRT TV
  • Flat-Panel, Rear-Projection, and CRT TV

产品概述

The TAS5601 is a 20-W (per channel) efficient, stereo digital amplifier power stage for driving 4 single-ended speakers, 2 bridge-tied speakers, or combination of single and bridge-tied loads. The TAS5601 can drive a speaker with an impedance as low as 4Ω. The high efficiency, >90% into 8-Ω loads, of the TAS5601 eliminates the need for an external heat sink.A simple interface to a digital audio PWM processor is shown below. The TAS5601 is fully protected against faults with short-circuit protection and thermal protection as well as overvoltage and undervoltage protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.
查看全部

TAS5601DCA 数据手册

数据手册 说明 数量 操作
TAS5601DCAR

Amplifier IC 2-Channel (Stereo) or 4-Channel (Quad) Class D 56-HTSSOP

 27页,2.88M 查看

TAS5601DCA 相关产品

IC 索引： A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9