156B

CHOKE DC FILTER 1.5MH 5A

46 EUROPE Basingstoke, UK 01256 812812 AUSTRALIA Queenstown, Australia 61-8-8240-2244 CANADA Guelph, Ontario (519) 822-2960 St. Laurent, Quebec (514) 343-9010 USA Cheektowaga, NY (716) 630-7030 ? www.hammondmfg.com OPEN BRACKET D.C. FILTER CHOKES Economical "open bracket" - channel mount. ? Tolerance of 15% on both inductance & ? resistance. Inductances measured at rated D.C. current. ? Minimum 5" long leads. ? Units will exhibit less inductance at slightly ? higher currents or more at lower currents. Perfect for high voltage power supply ? filtering. D.C. Filter (153-159 Series) Part No. Inductance Henrys D.C. Current (ma.) Resistance (Ohms) Max. Oper. Volts (D.C.) Wt. Lbs. Dim. Ref. 153E 7 25 770 300 .10 C1H 153H 2.2 50 305 300 .10 C1H 153L 0.9 75 125 300 .10 C1H 153M 0.6 100 86 300 .10 C1H 154E 20 20 1666 300 .25 C2H 154G 9 40 700 300 .25 C2H 154H 4 50 300 300 .25 C2H 154M 2 100 175 300 .25 C2H 155C 60 8 2750 400 .30 C4H 155G 7 40 340 400 .30 C4H 155H 5 50 270 40

D.C. Reactors or Filter Chokes Low to Medium Current www.hammondmfg.com 156B Mechanical A 2.81” / 71.4 mm B 1.5” / 38.1 mm C 1.69” / 42.9 mm D 2.38” / 60.5 mm G 0.19” / 4.8 mm Weight 0.5 lbs / 0.23 kg Electrical Inductance (+/- 15%) 1.5mH D.C. Current 5.0 A Resistance (+/- 15%) 0.07 ohms Maximum Operating Volt (D.C.) 400V Features ? Economical “open bracket” - channel mount. ? Tolerance of 15% on both inductance & resistance. ? Inductances measured at rated D.C. current. ? Minimum 5” long leads. ? Units will exhibit less inductance at slightly higher currents or more induc- tance at lower currents. ? Perfect for high voltage power supply filtering. ? Every unit is Hipot tested (100%) at 1,500 VAC ? Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

3757 W. Touhy Ave., Lincolnwood, IL 60712 ? (847) 675-1760 ? Fax (847) 673-2850 ? www.illcap.com 111 ?  Audio Coupling  Crossover Networks  Capacitance range: .47 μF to 1000 μF  Voltage range: 16 WVDC to 100 WVDC FEATURES Operating Temperature Range SPECIFICATIONS Capacitance Tolerance SPECIAL ORDER OPTIONS ? Special tolerances: ±10% (K), -10% + 30% (Q) ? Tape and Reel ? Polyester Sleeve ? Epoxy end seal -40°C to +85°C Leakage Current 5 minutes < .05 CV or 3μA whichever is greater ±20% at 120Hz, 25°C Shelf Life 1000 hours at + 85°C with no voltage applied. Units will meet load life specification Long LIfe 2,000 hours at +85°C with rated voltage reversing polarity every 250 hours Impedance Ratio 120Hz WVDC -25°C/20°C -40°C/20°C 22 2 2 65 4 3 16 25 50 100 16 25 50 100 .22 .20 .14 .1 Dissipation Factor 120Hz, 25°C tanδ WVDC Time WVDC 100 WVDC < 20% of initial measured value <200% of initial specified value

3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760 ● Fax (847) 675-2850 ● www.illcap.com BPA +85°C Non-polar Axial Lead Aluminum Electrolytic Capacitors Features ? Standard case sizes ? Lead free leads Applications ? Audio Coupling ? Crossover Networks Specifications Operating Temperature Range -40°C to +85°C Capacitance Tolerance +20% at 120 Hz, 20°C WVDC 16 25 50 100 Surge voltage SVDC 20 32 63 125 WVDC 16 25 50 100 Dissipation Factor Tan δ .22 .2 .14 .1 5 Minutes Leakage current .05CV or 3uA, Whichever is greater WVDC 16 25 50 100 -25°C to 20°C 2 2 2 2 Low temperature stability Impedance ratio (120 Hz) -40°C to +20°C 6 5 4 3 2000 hours at 85°C with rated WVDC and rated voltage reversed every 250 hours. Capacitance change <20% of initial measured value Dissipation factor <200% of maximum specified value Load Life Leakage current >100% of maximum specified value 1000 hours at 85°C with no voltage applied Capacitance

FEATURES Small size – Non/ Bi-Polar APPLICATIONS Audio Coupling – Crossover Networks Operating Temperature Range -40°C to +85°C Capacitance Tolerance +20% at 120 Hz, 20°C Surge Voltage WVDC 16 25 50 100 SVDC 20 32 63 125 Dissipation Factor WVDC 16 25 50 100 Tan δ .22 .2 .14 .1 Leakage Current 5 Minutes .05CV or 3uA, Whichever is greater Low Temperature Stability Impedance Ratio (120 Hz) WVDC 16 25 50 100 -25°C to 20°C 2 2 2 2 -40°C to +20°C 6 5 4 3 Load Life 2000 hours at 85°C with rated WVDC and rated voltage reversed every 250 hours. Capacitance Change <20% of initial measured value Dissipation Factor <200% of maximum specified value Leakage Current <100% of maximum specified value Shelf Life 1000 hours at 85°C with no voltage applied Capacitance Change <20% of initial measured value Dissipation Factor <200% of maximum specified value Leakage Current <100% of maximum specified value Ripple Current Multipliers Capacitance F

FEATURES Small size – Non/ Bi-Polar APPLICATIONS Audio Coupling – Crossover Networks Operating Temperature Range -40°C to +85°C Capacitance Tolerance +20% at 120 Hz, 20°C Surge Voltage WVDC 16 25 50 100 SVDC 20 32 63 125 Dissipation Factor WVDC 16 25 50 100 Tan δ .22 .2 .14 .1 Leakage Current 5 Minutes .05CV or 3uA, Whichever is greater Low Temperature Stability Impedance Ratio (120 Hz) WVDC 16 25 50 100 -25°C to 20°C 2 2 2 2 -40°C to +20°C 6 5 4 3 Load Life 2000 hours at 85°C with rated WVDC and rated voltage reversed every 250 hours. Capacitance Change <20% of initial measured value Dissipation Factor <200% of maximum specified value Leakage Current <100% of maximum specified value Shelf Life 1000 hours at 85°C with no voltage applied Capacitance Change <20% of initial measured value Dissipation Factor <200% of maximum specified value Leakage Current <100% of maximum specified value Ripple Current Multipliers Capacitance F

3757 W. Touhy Ave., Lincolnwood, IL 60712 ? (847) 675-1760 ? Fax (847) 673-2850 ? www.illcap.com 111 ?  Audio Coupling  Crossover Networks  Capacitance range: .47 μF to 1000 μF  Voltage range: 16 WVDC to 100 WVDC FEATURES Operating Temperature Range SPECIFICATIONS Capacitance Tolerance SPECIAL ORDER OPTIONS ? Special tolerances: ±10% (K), -10% + 30% (Q) ? Tape and Reel ? Polyester Sleeve ? Epoxy end seal -40°C to +85°C Leakage Current 5 minutes < .05 CV or 3μA whichever is greater ±20% at 120Hz, 25°C Shelf Life 1000 hours at + 85°C with no voltage applied. Units will meet load life specification Long LIfe 2,000 hours at +85°C with rated voltage reversing polarity every 250 hours Impedance Ratio 120Hz WVDC -25°C/20°C -40°C/20°C 22 2 2 65 4 3 16 25 50 100 16 25 50 100 .22 .20 .14 .1 Dissipation Factor 120Hz, 25°C tanδ WVDC Time WVDC 100 WVDC < 20% of initial measured value <200% of initial specified value

3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760 ● Fax (847) 675-2850 ● www.illcap.com BPA +85°C Non-polar Axial Lead Aluminum Electrolytic Capacitors Features ? Standard case sizes ? Lead free leads Applications ? Audio Coupling ? Crossover Networks Specifications Operating Temperature Range -40°C to +85°C Capacitance Tolerance +20% at 120 Hz, 20°C WVDC 16 25 50 100 Surge voltage SVDC 20 32 63 125 WVDC 16 25 50 100 Dissipation Factor Tan δ .22 .2 .14 .1 5 Minutes Leakage current .05CV or 3uA, Whichever is greater WVDC 16 25 50 100 -25°C to 20°C 2 2 2 2 Low temperature stability Impedance ratio (120 Hz) -40°C to +20°C 6 5 4 3 2000 hours at 85°C with rated WVDC and rated voltage reversed every 250 hours. Capacitance change <20% of initial measured value Dissipation factor <200% of maximum specified value Load Life Leakage current >100% of maximum specified value 1000 hours at 85°C with no voltage applied Capacitance

FEATURES Small size – Non/ Bi-Polar APPLICATIONS Audio Coupling – Crossover Networks Operating Temperature Range -40°C to +85°C Capacitance Tolerance +20% at 120 Hz, 20°C Surge Voltage WVDC 16 25 50 100 SVDC 20 32 63 125 Dissipation Factor WVDC 16 25 50 100 Tan δ .22 .2 .14 .1 Leakage Current 5 Minutes .05CV or 3uA, Whichever is greater Low Temperature Stability Impedance Ratio (120 Hz) WVDC 16 25 50 100 -25°C to 20°C 2 2 2 2 -40°C to +20°C 6 5 4 3 Load Life 2000 hours at 85°C with rated WVDC and rated voltage reversed every 250 hours. Capacitance Change <20% of initial measured value Dissipation Factor <200% of maximum specified value Leakage Current <100% of maximum specified value Shelf Life 1000 hours at 85°C with no voltage applied Capacitance Change <20% of initial measured value Dissipation Factor <200% of maximum specified value Leakage Current <100% of maximum specified value Ripple Current Multipliers Capacitance F