156M

CHOKE DC FILTER 3H 100MA

46 EUROPE Basingstoke, UK 01256 812812 AUSTRALIA Queenstown, Australia 61-8-8240-2244 CANADA Guelph, Ontario (519) 822-2960 St. Laurent, Quebec (514) 343-9010 USA Cheektowaga, NY (716) 630-7030 ? www.hammondmfg.com OPEN BRACKET D.C. FILTER CHOKES Economical "open bracket" - channel mount. ? Tolerance of 15% on both inductance & ? resistance. Inductances measured at rated D.C. current. ? Minimum 5" long leads. ? Units will exhibit less inductance at slightly ? higher currents or more at lower currents. Perfect for high voltage power supply ? filtering. D.C. Filter (153-159 Series) Part No. Inductance Henrys D.C. Current (ma.) Resistance (Ohms) Max. Oper. Volts (D.C.) Wt. Lbs. Dim. Ref. 153E 7 25 770 300 .10 C1H 153H 2.2 50 305 300 .10 C1H 153L 0.9 75 125 300 .10 C1H 153M 0.6 100 86 300 .10 C1H 154E 20 20 1666 300 .25 C2H 154G 9 40 700 300 .25 C2H 154H 4 50 300 300 .25 C2H 154M 2 100 175 300 .25 C2H 155C 60 8 2750 400 .30 C4H 155G 7 40 340 400 .30 C4H 155H 5 50 270 40

D.C. Reactors or Filter Chokes Low to Medium Current www.hammondmfg.com 156M Mechanical A 2.81” / 71.4 mm B 1.5” / 38.1 mm C 1.69” / 42.9 mm D 2.38” / 60.5 mm G 0.19” / 4.8 mm Weight 0.5 lbs / 0.23 kg Electrical Inductance (+/- 15%) 3H D.C. Current 100 ma. Resistance (+/- 15%) 86 ohms Maximum Operating Volt (D.C.) 400V Features ? Economical “open bracket” - channel mount. ? Tolerance of 15% on both inductance & resistance. ? Inductances measured at rated D.C. current. ? Minimum 5” long leads. ? Units will exhibit less inductance at slightly higher currents or more induc- tance at lower currents. ? Perfect for high voltage power supply filtering. ? Every unit is Hipot tested (100%) at 1,500 VAC ? Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

3757 W. Touhy Ave., Lincolnwood, IL 60712 ? (847) 675-1760 ? Fax (847) 673-2850 ? www.illcap.com 182 ? AC/Motor Run Film Capacitors MAB Operating Temperature -40?C to +105?C without use of approvals Range -25?C to +85?C for use of approvals Capacitance Tolerance +/- 10% at 1kHz, 20?C See Voltage Code Table Voltage must be derated by 1.25% per °C exceeding 85°C. Dissipation Factor (max) at 20?C. Insulation Resistance @20?C(<70% RH) for 1 minute at 100VDC Dielectric Strength Self Inductance <1nH/mm of lead spacing and lead wire length. Capacitance Drift <1.0% up to 40?C after 2 years Temperature Coefficient -200ppm/?C +/- 100ppm/?C Load Life Test Capacitance Change ≤3% Dielectric Polypropylene Electrodes Vacuum Deposited Metal Layers Construction Metallized Film Leads Solid or Stranded Tinned Copper Wire Coating Solvent resistant plastic box (UL 94-V1) with epoxy fills (UL 94V-0) Freq (kHz) C>22μF C≤ 2.2μF 2.2μF 10,000M? x μF for C<1μF.

FEATURES Small size – Good dvdt – EN60252-1 rated APPLICATIONS AC application – motor run – AC/DC motor controls – Switching power supplies Operating Temperature Range -40°C to +100°C without approvals -25°C to +85°C with approvals Capacitance Tolerance +10% at 1 kHz, 25°C +5% optional Peak, AC voltage (50/60 Hz) Code A04 A03 A02 A01 A05 WVDC 370 500 600 800 1200 SVDC 470 625 750 1050 1500 VAC 160/200 250/320 320/400/430 400/432/500 500/600 Dissipation Factor (MAX) Tan δ at 1 kHz and 25°C C<2.2uF 2.222uF .06% .1% .12% .15% Insulation Resistance @25°C (<70% RH)for 1 minute at 100VDC applied 10000 M ?, C<1uF 3000 M ?xuF, C>1uF Self Inductance <1 nano-Henry per mm of lead spacing Dielectric Strength Terminal to Terminal Terminal to Case 160% of VAC for 60 Seconds and 25°C or 200% VAC applied for 60 Seconds and 25°C for EN 60252-1 approval 3kVAC (50/60 Hz) applied for 60 Seconds and 25°C Damp Heat 56 days with no v

3757 W. Touhy Ave., Lincolnwood, IL 60712 ? (847) 675-1760 ? Fax (847) 673-2850 ? www.illcap.com 182 ? AC/Motor Run Film Capacitors MAB Operating Temperature -40?C to +105?C without use of approvals Range -25?C to +85?C for use of approvals Capacitance Tolerance +/- 10% at 1kHz, 20?C See Voltage Code Table Voltage must be derated by 1.25% per °C exceeding 85°C. Dissipation Factor (max) at 20?C. Insulation Resistance @20?C(<70% RH) for 1 minute at 100VDC Dielectric Strength Self Inductance <1nH/mm of lead spacing and lead wire length. Capacitance Drift <1.0% up to 40?C after 2 years Temperature Coefficient -200ppm/?C +/- 100ppm/?C Load Life Test Capacitance Change ≤3% Dielectric Polypropylene Electrodes Vacuum Deposited Metal Layers Construction Metallized Film Leads Solid or Stranded Tinned Copper Wire Coating Solvent resistant plastic box (UL 94-V1) with epoxy fills (UL 94V-0) Freq (kHz) C>22μF C≤ 2.2μF 2.2μF 10,000M? x μF for C<1μF.

FEATURES Small size – Good dvdt – EN60252-1 rated APPLICATIONS AC application – motor run – AC/DC motor controls – Switching power supplies Operating Temperature Range -40°C to +100°C without approvals -25°C to +85°C with approvals Capacitance Tolerance +10% at 1 kHz, 25°C +5% optional Peak, AC voltage (50/60 Hz) Code A04 A03 A02 A01 A05 WVDC 370 500 600 800 1200 SVDC 470 625 750 1050 1500 VAC 160/200 250/320 320/400/430 400/432/500 500/600 Dissipation Factor (MAX) Tan δ at 1 kHz and 25°C C<2.2uF 2.222uF .06% .1% .12% .15% Insulation Resistance @25°C (<70% RH)for 1 minute at 100VDC applied 10000 M ?, C<1uF 3000 M ?xuF, C>1uF Self Inductance <1 nano-Henry per mm of lead spacing Dielectric Strength Terminal to Terminal Terminal to Case 160% of VAC for 60 Seconds and 25°C or 200% VAC applied for 60 Seconds and 25°C for EN 60252-1 approval 3kVAC (50/60 Hz) applied for 60 Seconds and 25°C Damp Heat 56 days with no v

3757 W. Touhy Ave., Lincolnwood, IL 60712 ? (847) 675-1760 ? Fax (847) 673-2850 ? www.illcap.com 182 ? AC/Motor Run Film Capacitors MAB Operating Temperature -40?C to +105?C without use of approvals Range -25?C to +85?C for use of approvals Capacitance Tolerance +/- 10% at 1kHz, 20?C See Voltage Code Table Voltage must be derated by 1.25% per °C exceeding 85°C. Dissipation Factor (max) at 20?C. Insulation Resistance @20?C(<70% RH) for 1 minute at 100VDC Dielectric Strength Self Inductance <1nH/mm of lead spacing and lead wire length. Capacitance Drift <1.0% up to 40?C after 2 years Temperature Coefficient -200ppm/?C +/- 100ppm/?C Load Life Test Capacitance Change ≤3% Dielectric Polypropylene Electrodes Vacuum Deposited Metal Layers Construction Metallized Film Leads Solid or Stranded Tinned Copper Wire Coating Solvent resistant plastic box (UL 94-V1) with epoxy fills (UL 94V-0) Freq (kHz) C>22μF C≤ 2.2μF 2.2μF 10,000M? x μF for C<1μF.

FEATURES Small size – Good dvdt – EN60252-1 rated APPLICATIONS AC application – motor run – AC/DC motor controls – Switching power supplies Operating Temperature Range -40°C to +100°C without approvals -25°C to +85°C with approvals Capacitance Tolerance +10% at 1 kHz, 25°C +5% optional Peak, AC voltage (50/60 Hz) Code A04 A03 A02 A01 A05 WVDC 370 500 600 800 1200 SVDC 470 625 750 1050 1500 VAC 160/200 250/320 320/400/430 400/432/500 500/600 Dissipation Factor (MAX) Tan δ at 1 kHz and 25°C C<2.2uF 2.222uF .06% .1% .12% .15% Insulation Resistance @25°C (<70% RH)for 1 minute at 100VDC applied 10000 M ?, C<1uF 3000 M ?xuF, C>1uF Self Inductance <1 nano-Henry per mm of lead spacing Dielectric Strength Terminal to Terminal Terminal to Case 160% of VAC for 60 Seconds and 25°C or 200% VAC applied for 60 Seconds and 25°C for EN 60252-1 approval 3kVAC (50/60 Hz) applied for 60 Seconds and 25°C Damp Heat 56 days with no v

3757 W. Touhy Ave., Lincolnwood, IL 60712 ? (847) 675-1760 ? Fax (847) 673-2850 ? www.illcap.com 200 ? -40?C to +85?C MAR Axial Leaded Metallized Polypropylene Film Operating Temperature Range Capacitance Tolerance +/- 10% at 1kHz, 25?C, ±5% optional Dissipation Factor (max) (tanδ)at 1 kHz and 25°C Insulation Resistance @20?C(<70% RH) for 1 minute at 100VDC Self inductance <1nH/mm of body length and lead wire length. Dielectric Strength 370 500 600 700 800 470 625 750 875 1050 160 275/320 320/400 400/440 400/450 WVDC SVDC VAC WVDC VAC Hours Peak, AC voltage (50/60 Hz) Freq (kHz) C≤2.5μF 2.5μF20μF 1 .0007 .0012 .0016 15000 M? xμF for C≤1μF 3000M? xμF for C>1μF Terminal to terminal Terminal to case 200% of VAC applied between terminals for 10 Seconds and 25°C 3kVAC applied for 10 seconds between terminals and case 56 Days with no voltage applied at +40C and 93%(+2%) relative humididty Capacitance Change <+2% of initially measured value Dissipation Factor Insulation Re