153M

CHOKE DC FILTER 0.6H100MA

46 EUROPE Basingstoke, UK 01256 812812 AUSTRALIA Queenstown, Australia 61-8-8240-2244 CANADA Guelph, Ontario (519) 822-2960 St. Laurent, Quebec (514) 343-9010 USA Cheektowaga, NY (716) 630-7030 ? www.hammondmfg.com OPEN BRACKET D.C. FILTER CHOKES Economical "open bracket" - channel mount. ? Tolerance of 15% on both inductance & ? resistance. Inductances measured at rated D.C. current. ? Minimum 5" long leads. ? Units will exhibit less inductance at slightly ? higher currents or more at lower currents. Perfect for high voltage power supply ? filtering. D.C. Filter (153-159 Series) Part No. Inductance Henrys D.C. Current (ma.) Resistance (Ohms) Max. Oper. Volts (D.C.) Wt. Lbs. Dim. Ref. 153E 7 25 770 300 .10 C1H 153H 2.2 50 305 300 .10 C1H 153L 0.9 75 125 300 .10 C1H 153M 0.6 100 86 300 .10 C1H 154E 20 20 1666 300 .25 C2H 154G 9 40 700 300 .25 C2H 154H 4 50 300 300 .25 C2H 154M 2 100 175 300 .25 C2H 155C 60 8 2750 400 .30 C4H 155G 7 40 340 400 .30 C4H 155H 5 50 270 40

D.C. Reactors or Filter Chokes Low to Medium Current www.hammondmfg.com 153M Mechanical A 1.63” / 41.4 mm B 0.88” / 22.4 mm C 0.81” / 20.6 mm D 1.38” / 35.1 mm G 0.13” / 3.3 mm Weight 0.1 lbs / 0.05 kg Electrical Inductance (+/- 15%) 0.6H D.C. Current 100 ma. Resistance (+/- 15%) 86 ohms Maximum Operating Volt (D.C.) 300V Features ? Economical “open bracket” - channel mount. ? Tolerance of 15% on both inductance & resistance. ? Inductances measured at rated D.C. current. ? Minimum 5” long leads. ? Units will exhibit less inductance at slightly higher currents or more induc- tance at lower currents. ? Perfect for high voltage power supply filtering. ? Every unit is Hipot tested (100%) at 1,500 VAC ? Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

3757 W. Touhy Ave., Lincolnwood, IL 60712 ? (847) 675-1760 ? Fax (847) 673-2850 ? www.illcap.com ? ? EMI filter ? Antenna coupling ? Across the line ? Line bypass MKP Class X2 Radial Lead Metallized Polypropylene Capacitors Voltage Impulse Test ±10% at 1kHz, 25°C Capacitance Tolerance -40°C to +110°C Humidity Test Load Life Voltage Range 50-60Hz VAC Dissipation Factor 0.1% at 1 kHz, 20°C Capacitance Terminal to Terminal Terminal to Case ≤0.33 μF 15,000M? at 100VDC >30,000 M? at 100VDC >500M? at 500VDC >0.33 μF 5,000 M? x μF at 100VDC >30,000 M? at 100VDC >500M? at 500VDC 1000 hours at+110°C with 125% of rated voltage with the voltage increased to 1000Vrms for 0.1 seconds every hour. <5% maximum of initial measured value <0.15% at 1kHz Capacitance Change Dissipation Factor Insulation Resistance <5% of initial measured value <0.15% at 1kHz Self-inductance Dielectric Strength ≤1 nH/mm along the capacitor pitch and lead length Capacitance Drift Factor Capacitance Temperature

FEATURES Small size – Safety Agency approved – Metalized Polypropylene APPLICATIONS EMI filters – Line bypass – Across the line – Antenna coupling Operating Temperature Range -40°C to +110°C Capacitance Tolerance +10% at 1 kHz, 20°C CSA ENEC CQC UL AC voltage (50/60 Hz) 250/310 VAC 305 VAC 275 VAC 250/310 VAC Tan δ Dissipation Factor at 1 kHz and 20°C .1% Max Capacitance Terminal to Terminal Terminal to Case <0.33uF 15000 M ? >30000 M ? at 100VDC >5000 M ? at 500VDC Insulation Resistance @20°C (<70% RH)for 1 minute at 100VDC applied >0.33uF 5000 M ?xuF >30000 M ? at 100VDC >5000 M ? at 500VDC Self Inductance <1 nano-Henry per mm of lead spacing and lead length Terminal to Terminal C<.0068uF, 1500 VAC or 2121 VDC applied for 60 Seconds C>.0068uF, 1000 VAC or 1768 VDC applied for 60 seconds Cut-off current: 2A ac or 10mAdc Current limiting resistance: 1 ?/V Dielectric Strength Terminal to case 2050VDC applied between the termina

FEATURES Small size – Safety Agency approved – Metalized Polypropylene APPLICATIONS EMI filters – Across the line Operating Temperature Range -40°C to +110°C Capacitance Tolerance +10% at 1 kHz, 20°C AC voltage (50/60 Hz) UL/CSA VDE CQC 250/275/310 250/275/310 310 Dissipation Factor at 1 kHz and 20°C Tan δ .1% Max Insulation Resistance @20°C (<70% RH)for 1 minute at 100VDC applied Capacitance Terminal to Terminal Terminal to Case <0.33uF 15000 MΩ >30000 MΩ at 100VDC >5000 MΩ at 500VDC >0.33uF 5000 MΩxuF >30000 MΩ at 100VDC >5000 MΩ at 500VDC Self Inductance <1 nano-Henry per mm of lead spacing and lead length Dielectric Strength Terminal to Terminal C<.0068uF, 1500 VAC or 2121 VDC applied for 60 seconds C>.0068uF, 1768VDC or 1000 VAC applied for 60 seconds Cut-off current: 2A ac or 10mAdc Current limiting resistance: 1Ω/V Terminal to case 2050VAC (50/60 Hz) applied between the terminals and case for 60 seconds and 20°C Life Ex

3757 W. Touhy Ave., Lincolnwood, IL 60712 ? (847) 675-1760 ? Fax (847) 673-2850 ? www.illcap.com ? ? EMI filter ? Antenna coupling ? Across the line ? Line bypass MKP Class X2 Radial Lead Metallized Polypropylene Capacitors Voltage Impulse Test ±10% at 1kHz, 25°C Capacitance Tolerance -40°C to +110°C Humidity Test Load Life Voltage Range 50-60Hz VAC Dissipation Factor 0.1% at 1 kHz, 20°C Capacitance Terminal to Terminal Terminal to Case ≤0.33 μF 15,000M? at 100VDC >30,000 M? at 100VDC >500M? at 500VDC >0.33 μF 5,000 M? x μF at 100VDC >30,000 M? at 100VDC >500M? at 500VDC 1000 hours at+110°C with 125% of rated voltage with the voltage increased to 1000Vrms for 0.1 seconds every hour. <5% maximum of initial measured value <0.15% at 1kHz Capacitance Change Dissipation Factor Insulation Resistance <5% of initial measured value <0.15% at 1kHz Self-inductance Dielectric Strength ≤1 nH/mm along the capacitor pitch and lead length Capacitance Drift Factor Capacitance Temperature

FEATURES Small size – Safety Agency approved – Metalized Polypropylene APPLICATIONS EMI filters – Line bypass – Across the line – Antenna coupling Operating Temperature Range -40°C to +110°C Capacitance Tolerance +10% at 1 kHz, 20°C CSA ENEC CQC UL AC voltage (50/60 Hz) 250/310 VAC 305 VAC 275 VAC 250/310 VAC Tan δ Dissipation Factor at 1 kHz and 20°C .1% Max Capacitance Terminal to Terminal Terminal to Case <0.33uF 15000 M ? >30000 M ? at 100VDC >5000 M ? at 500VDC Insulation Resistance @20°C (<70% RH)for 1 minute at 100VDC applied >0.33uF 5000 M ?xuF >30000 M ? at 100VDC >5000 M ? at 500VDC Self Inductance <1 nano-Henry per mm of lead spacing and lead length Terminal to Terminal C<.0068uF, 1500 VAC or 2121 VDC applied for 60 Seconds C>.0068uF, 1000 VAC or 1768 VDC applied for 60 seconds Cut-off current: 2A ac or 10mAdc Current limiting resistance: 1 ?/V Dielectric Strength Terminal to case 2050VDC applied between the termina

FEATURES Small size – Safety Agency approved – Metalized Polypropylene APPLICATIONS EMI filters – Across the line Operating Temperature Range -40°C to +110°C Capacitance Tolerance +10% at 1 kHz, 20°C AC voltage (50/60 Hz) UL/CSA VDE CQC 250/275/310 250/275/310 310 Dissipation Factor at 1 kHz and 20°C Tan δ .1% Max Insulation Resistance @20°C (<70% RH)for 1 minute at 100VDC applied Capacitance Terminal to Terminal Terminal to Case <0.33uF 15000 MΩ >30000 MΩ at 100VDC >5000 MΩ at 500VDC >0.33uF 5000 MΩxuF >30000 MΩ at 100VDC >5000 MΩ at 500VDC Self Inductance <1 nano-Henry per mm of lead spacing and lead length Dielectric Strength Terminal to Terminal C<.0068uF, 1500 VAC or 2121 VDC applied for 60 seconds C>.0068uF, 1768VDC or 1000 VAC applied for 60 seconds Cut-off current: 2A ac or 10mAdc Current limiting resistance: 1Ω/V Terminal to case 2050VAC (50/60 Hz) applied between the terminals and case for 60 seconds and 20°C Life Ex

3757 W. Touhy Ave., Lincolnwood, IL 60712 ? (847) 675-1760 ? Fax (847) 673-2850 ? www.illcap.com ? ? EMI filter ? Antenna coupling ? Across the line ? Line bypass MKP Class X2 Radial Lead Metallized Polypropylene Capacitors Voltage Impulse Test ±10% at 1kHz, 25°C Capacitance Tolerance -40°C to +110°C Humidity Test Load Life Voltage Range 50-60Hz VAC Dissipation Factor 0.1% at 1 kHz, 20°C Capacitance Terminal to Terminal Terminal to Case ≤0.33 μF 15,000M? at 100VDC >30,000 M? at 100VDC >500M? at 500VDC >0.33 μF 5,000 M? x μF at 100VDC >30,000 M? at 100VDC >500M? at 500VDC 1000 hours at+110°C with 125% of rated voltage with the voltage increased to 1000Vrms for 0.1 seconds every hour. <5% maximum of initial measured value <0.15% at 1kHz Capacitance Change Dissipation Factor Insulation Resistance <5% of initial measured value <0.15% at 1kHz Self-inductance Dielectric Strength ≤1 nH/mm along the capacitor pitch and lead length Capacitance Drift Factor Capacitance Temperature