您好，欢迎来到知芯网
搜索
热门搜索：
发布采购

TLC5905PAP

Texas Instruments PMIC - LED 驱动器
  • 封装：64-TQFP 裸露焊盘
  • RoHS：无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式：托盘
  • 参考价格：$3.5055-$7.13

更新日期：2024-04-01 00:04:00

TLC5905PAP

Texas Instruments PMIC - LED 驱动器

产品简介：具有可选数据输出时序的 8/16 通道 LED 驱动器

查看详情
  • 封装：64-TQFP 裸露焊盘
  • RoHS：无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式：托盘
  • 参考价格：$3.5055-$7.13

TLC5905PAP 供应商

  • 公司
  • 型号
  • 品牌
  • 封装/批号
  • 数量
  • 地区
  • 日期
  • 说明
  • 询价

TLC5905PAP 中文资料属性参数

  • 标准包装：160
  • 类别：集成电路 (IC)
  • 家庭：PMIC - LED 驱动器
  • 系列：-
  • 恒定电流：是
  • 恒定电压：-
  • 拓扑：-
  • 输出数：16
  • 内部驱动器：是
  • 类型 - 主要：通用
  • 类型 - 次要：-
  • 频率：15MHz
  • 电源电压：4.5 V ~ 5.5 V
  • 输出电压：17V
  • 安装类型：表面贴装
  • 封装/外壳：64-TQFP 裸露焊盘
  • 供应商设备封装：64-HTQFP（10x10）
  • 包装：托盘
  • 工作温度：-20°C ~ 85°C
  • 其它名称：296-2379

产品特性

  • Drive Capability and Output Counts: 80 mA (Current Sink) × 16 Bits 120 mA (Current Sink) × 8 Bits
  • 80 mA (Current Sink) × 16 Bits
  • 120 mA (Current Sink) × 8 Bits
  • Constant Current Output Range: 5 mA to 80 mA/10 mA to 120 mA (Selectable by MODE Terminal) ( Current Value Setting for All Output Terminals Using External Resistor and Internal Brightness Control Register)
  • 5 mA to 80 mA/10 mA to 120 mA (Selectable by MODE Terminal) ( Current Value Setting for All Output Terminals Using External Resistor and Internal Brightness Control Register)
  • Constant Current Accuracy ±4% (Maximum Error Between Bits)
  • Voltage Applied to Constant Current Output Terminals: Minimum 0.4 V (Output Current 5 mA to 40 mA) Minimum 0.7 V (Output Current 40 mA to 80 mA)
  • Minimum 0.4 V (Output Current 5 mA to 40 mA)
  • Minimum 0.7 V (Output Current 40 mA to 80 mA)
  • 256 Gray Scale Display: Pulse Width Control 256 Steps
  • Pulse Width Control 256 Steps
  • Brightness Adjustment: Output Current Adjustment for 32 Steps (Adjustment for Brightness Deviation Between LED Modules) 8 Steps Brightness Control by 8 Times Speed Gray Scale Control Clock (Brightness Adjustment for Panel)
  • Output Current Adjustment for 32 Steps (Adjustment for Brightness Deviation Between LED Modules)
  • 8 Steps Brightness Control by 8 Times Speed Gray Scale Control Clock (Brightness Adjustment for Panel)
  • Error Output Signal Check: Check Error Output Signal Line Such as Protection Circuit When Operating
  • Check Error Output Signal Line Such as Protection Circuit When Operating
  • Data Output Timing Selectable: Select Data Output Timing for Shift Register Relative to Clock
  • Select Data Output Timing for Shift Register Relative to Clock
  • OVM (Output Voltage Monitor): Monitor Voltage on Constant Current Output Terminals (Detect LED Disconnection and Short Circuit)
  • Monitor Voltage on Constant Current Output Terminals (Detect LED Disconnection and Short Circuit)
  • WDT (Watchdog Timer): Turn Output Off When Scan Signal Stopped
  • Turn Output Off When Scan Signal Stopped
  • TSD (Thermal Shut Down): Turn Output Off When Junction Temperature Exceeds Limit
  • Turn Output Off When Junction Temperature Exceeds Limit
  • Data Input: Clock Synchronized 1 Bit Serial Input (Shmitt-Triggered Input)
  • Clock Synchronized 1 Bit Serial Input (Shmitt-Triggered Input)
  • Data Output: Clock Synchronized 1 Bit Serial Output (3-State Output)
  • Clock Synchronized 1 Bit Serial Output (3-State Output)
  • Input Signal Level: CMOS Level
  • CMOS Level
  • Power Supply Voltage...4.5 V to 5.5 V
  • Maximum Output Voltage...17 V
  • Data Transfer Rate...15 MHz (Max
  • Gray Scale Clock Frequency...8 MHz (Max)
  • Operating Free-Air Temperature Range -20°C to 85°C
  • 64-Pin HTQFP Package (PD = 4.9 W, TA = 25°C)

产品概述

The TLC5905 is a constant current driver that incorporates shift register, data latch, constant current circuitry with a current value adjustable and 256 gray scale display that uses pulse width control. The output current can be selected as maximum 80 mA with 16 bits or 120 mA with 8 bit. The current value of the constant current output is set by one external resistor. After this device is mounted on a printed-circuit board (PCB), the brightness deviation between LED modules (ICs) can be adjusted using an external data input, and the brightness control for the panel can be accomplished by the brightness adjustment circuitry. Also, the device incorporates the output voltage monitor (OVM) used for LED open detection (LOD) by monitoring constant current output. Moreover, the device incorporates watchdog timer (WDT) circuitry, which turns constant current output off when the scan signal stops during dynamic scanning operation, and thermal shutdown (TSD) circuitry, which turns constant current output off when the junction temperature exceeds the limit.
查看全部

TLC5905PAP 数据手册

数据手册 说明 数量 操作
TLC5905PAP

LED Driver IC 16 Output Linear Shift Register 80mA, 120mA 64-HTQFP (10x10)

 28页,414K 查看

TLC5905PAP 相关产品

IC 索引： A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9