您好，欢迎来到知芯网
搜索
热门搜索：
发布采购

TLC5904PZP

Texas Instruments PMIC - LED 驱动器
  • 封装：100-TQFP 裸露焊盘
  • RoHS：无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式：托盘
  • 参考价格：$10.463-$8.6025

更新日期：2024-04-01 00:04:00

TLC5904PZP

Texas Instruments PMIC - LED 驱动器

产品简介：8/16 通道 LED 驱动器

查看详情
  • 封装：100-TQFP 裸露焊盘
  • RoHS：无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式：托盘
  • 参考价格：$10.463-$8.6025

TLC5904PZP 供应商

  • 公司
  • 型号
  • 品牌
  • 封装/批号
  • 数量
  • 地区
  • 日期
  • 说明
  • 询价

TLC5904PZP 中文资料属性参数

  • 标准包装：90
  • 类别：集成电路 (IC)
  • 家庭：PMIC - LED 驱动器
  • 系列：-
  • 恒定电流：是
  • 恒定电压：-
  • 拓扑：线性
  • 输出数：16
  • 内部驱动器：是
  • 类型 - 主要：通用
  • 类型 - 次要：-
  • 频率：15MHz
  • 电源电压：4.5 V ~ 5.5 V
  • 输出电压：17V
  • 安装类型：表面贴装
  • 封装/外壳：100-TQFP 裸露焊盘
  • 供应商设备封装：100-HTQFP（14x14）
  • 包装：托盘
  • 工作温度：-20°C ~ 85°C
  • 其它名称：296-2378

产品特性

  • Drive Capability and Output Counts 80 mA (Current Sink) x 16 Bits 120 mA (Current Sink) x 8 Bits
  • 80 mA (Current Sink) x 16 Bits
  • 120 mA (Current Sink) x 8 Bits
  • Constant Current Output Range 5 to 80 mA/10 to 120mA (Selectable by MODE Terminal) ( Current Value Setting for All Output Terminals Using External Resistor and Internal Brightness Control Register)
  • 5 to 80 mA/10 to 120mA (Selectable by MODE Terminal) ( Current Value Setting for All Output Terminals Using External Resistor and Internal Brightness Control Register)
  • Constant Current Accuracy ±4% (Maximum Error Between Bits)
  • ±4% (Maximum Error Between Bits)
  • Voltage Applied to Constant Current Output Terminals Minimum 0.4 V (Output Current 5 mA to 40 mA) Minimum 0.7 V (Output Current 40 to 80 mA)
  • Minimum 0.4 V (Output Current 5 mA to 40 mA)
  • Minimum 0.7 V (Output Current 40 to 80 mA)
  • 256 Gray Scale Display Pulse Width Control 256 Steps
  • Pulse Width Control 256 Steps
  • Brightness Adjustment Output Current Adjustment for 32 Steps (Adjustment for Brightness Deviation Between LED Modules) 8 Steps Brightness Control by 8 Times Speed Gray Scale Control Clock (Brightness Adjustment for Panel)
  • Output Current Adjustment for 32 Steps (Adjustment for Brightness Deviation Between LED Modules)
  • 8 Steps Brightness Control by 8 Times Speed Gray Scale Control Clock (Brightness Adjustment for Panel)
  • Error Output Signal Check Check Error Output Signal Line Such as Protection Circuit When Operating
  • Check Error Output Signal Line Such as Protection Circuit When Operating
  • Data Output Timing Selectable Select Data Output Timing for Shift Register Relative to Clock
  • Select Data Output Timing for Shift Register Relative to Clock
  • OVM (Output Voltage Monitor) Monitor Voltage on Constant Current Output Terminals (Detect LED Disconnection and Short Circuit)
  • Monitor Voltage on Constant Current Output Terminals (Detect LED Disconnection and Short Circuit)
  • WDT (Watchdog Timer) Turn Output Off When Scan Signal Stopped
  • Turn Output Off When Scan Signal Stopped
  • TSD (Thermal ShutDown) Turn Output Off When Junction Temperature Exceeds Limit
  • Turn Output Off When Junction Temperature Exceeds Limit
  • Data Input Clock Synchronized 8 Bit Parallel Input (Schmitt-Triggered Input)
  • Clock Synchronized 8 Bit Parallel Input (Schmitt-Triggered Input)
  • Data Output Clock Synchronized 8 Bit Parallel Output (3-State Output)
  • Clock Synchronized 8 Bit Parallel Output (3-State Output)
  • Input Signal Level...CMOS Level
  • Power Supply Voltage...4.5 V to 5.5 V
  • Maximum Output Voltage...17 V (Max)
  • Data Transfer Rate...15 MHz (Max)
  • Gray Scale Clock Frequency 8 MHz (Max)
  • Operating Free-Air Temperature Range -20°C to 85°C
  • 100-Pin HTQFP Package (PD=4.7 W, TA = 25° C)

产品概述

The TLC5904 is a constant current driver incorporating shift register, data latch, and constant current circuitry with current value adjustable and a 256 gray scale display using pulse width control. The output current can be selected as maximum 80 mA with 16 bits or 120 mA with 8 bits, and the current value of constant current output can be set by one external resistor. After this device is mounted on a PCB, the brightness deviation between LED modules (ICs) can be adjusted by external data input, and the brightness control for the panel can be accomplished by the brightness adjustment circuitry. Also, the device incorporates the output voltage monitor (OVM) used for LED open detection (LOD) by monitoring the constant current output. Moreover, the device incorporates watchdog time (WDT) circuitry, which turns the constant current output off when a scan signal is stopped at the dynamic scanning operation, and thermal shutdown (TSD) circuitry, which turns the constant current output off when the junction temperature exceeds the limit.
查看全部

TLC5904PZP 数据手册

数据手册 说明 数量 操作
TLC5904PZP

LED DRIVER

 27 Pages页,420K 查看
TLC5904PZP

LED Driver IC 16 Output Linear Shift Register 80mA, 120mA 100-HTQFP (14x14)

 28页,430K 查看

TLC5904PZP 相关产品

IC 索引： A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9