您好,欢迎来到知芯网
  • 封装:16-VFQFN 裸露焊盘
  • RoHS:无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式:带卷 (TR)
  • 参考价格:$5.865

更新日期:2024-04-01 00:04:00

产品简介:11.3Gbps 速率可选限幅放大器

查看详情
  • 封装:16-VFQFN 裸露焊盘
  • RoHS:无铅 / 符合限制有害物质指令(RoHS)规范要求
  • 包装方式:带卷 (TR)
  • 参考价格:$5.865

ONET8501PRGTT 供应商

  • 公司
  • 型号
  • 品牌
  • 封装/批号
  • 数量
  • 地区
  • 日期
  • 说明
  • 询价

ONET8501PRGTT 中文资料属性参数

  • 标准包装:250
  • 类别:集成电路 (IC)
  • 家庭:Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
  • 系列:-
  • 放大器类型:限制
  • 电路数:1
  • 输出类型:-
  • 转换速率:-
  • 增益带宽积:-
  • -3db带宽:12GHz
  • 电流 - 输入偏压:-
  • 电压 - 输入偏移:-
  • 电流 - 电源:48mA
  • 电流 - 输出 / 通道:-
  • 电压 - 电源,单路/双路(±):2.95 V ~ 3.6 V
  • 工作温度:-40°C ~ 100°C
  • 安装类型:表面贴装
  • 封装/外壳:16-VFQFN 裸露焊盘
  • 供应商设备封装:16-QFN-EP(3x3)
  • 包装:带卷 (TR)

产品特性

  • Up to 11.3-Gbps Operation
  • 2-Wire Digital Interface
  • Digitally Selectable Input Bandwidth
  • Adjustable LOS Threshold
  • Digitally Selectable Output Voltage
  • Digitally Selectable Output Pre-Emphasis
  • Adjustable Input Threshold Voltage
  • Low Power Consumption
  • Input Offset Cancellation
  • CML Data Outputs with On-Chip 50- Back-Termination to VCC
  • Single +3.3-V Supply
  • Output Disable
  • Surface Mount Small Footprint 3 mm × 3 mm 16-Pin RoHS compliant QFN Package
  • APPLICATIONS 10-Gigabit Ethernet Optical Receivers8x and 10x Fiber Channel Optical ReceiversSONET OC-192/SDH-64 Optical ReceiversSFP+ and XFP Transceiver ModulesXENPAK, XPAK, X2 and 300-pin MSA Transponder ModulesCable Driver and Receiver
  • 10-Gigabit Ethernet Optical Receivers
  • 8x and 10x Fiber Channel Optical Receivers
  • SONET OC-192/SDH-64 Optical Receivers
  • SFP+ and XFP Transceiver Modules
  • XENPAK, XPAK, X2 and 300-pin MSA Transponder Modules
  • Cable Driver and Receiver

产品概述

The ONET8501P is a high-speed, 3.3-V limiting amplifier for multiple fiber optic and copper cable applications with data rates from 2 Gbps up to 11.3 Gbps.The device provides a two-wire serial interface which allows digital control of the bandwidth, output amplitude, output pre-emphasis, input threshold voltage (slice level) and the loss of signal assert level. Predetermined settings for bandwidth and LOS assert levels can also be selected with external rate selection pins.The ONET8501P provides a gain of about 40dB which ensures a fully differential output swing for input signals as low as 10 mVpp. The output amplitude can be adjusted to 300 mVpp, 600 mVpp, or 900 mVpp. To compensate for frequency dependent loss of microstrips or striplines connected to the output of the device, programmable pre-emphasis is included in the output stage. A settable loss of signal detection and output disable are also provided.The part, available in RoHS compliant small footprint 3 mm × 3 mm 16-pin QFN package, typically dissipates less than 160 mW and is characterized for operation from -40°C to 100°C.

ONET8501PRGTT 电路图

ONET8501PRGTT 电路图

ONET8501PRGTT 电路图

IC 索引: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9