- 参考价格:¥10.83
更新日期:2024-04-01 00:04:00

DAC102S085CISDX 供应商
- 公司
- 型号
- 品牌
- 封装/批号
- 数量
- 地区
- 日期
- 说明
- 询价
-
TI
-
原厂原装
22+ -
3288
-
上海市
-
-
-
一级代理原装
-
TI(德州仪器)
-
WSON-10(3x3)
2022+ -
12000
-
上海市
-
-
-
原装可开发票
DAC102S085CISDX 中文资料属性参数
- 制造商:National Semiconductor (TI)
- 转换器数量:2
- DAC 输出端数量:2
- 分辨率:10 bit
- 接口类型:Serial (3-Wire, Microwire, QSPI, SPI)
- 稳定时间:6 us
- 最大工作温度:+ 105 C
- 封装 / 箱体:LLP EP
- 封装:Reel
- 最小工作温度:- 40 C
- 输出类型:Voltage
- 工厂包装数量:4500
- Supply Voltage - Max:5.5 V
- Supply Voltage - Min:2.7 V
- 电压参考:External
产品特性
- Ensured Monotonicity
- Low Power Operation
- Rail-to-Rail Voltage Output
- Power-On Reset to 0 V
- Simultaneous Output Updating
- Wide Power Supply Range (2.7 V to 5.5 V)
- Industrys Smallest Package
- Power Down Modes
- Key Specifications Resolution: 10 Bits INL: ±2 LSB (Maximum) DNL: +0.35 or 0.25 LSB (Maximum) Settling Time: 6 µs (Maximum) Zero Code Error: 15 mV (Maximum) Full-Scale Error: 0.75% FS (Maximum) Supply Power Normal: 0.6 mW at 3 V, 1.6 mW at 5 V (Typical) Power Down: 0.3 µW at 3 V, 0.8 µW at 5 V (Typical)
- Resolution: 10 Bits
- INL: ±2 LSB (Maximum)
- DNL: +0.35 or 0.25 LSB (Maximum)
- Settling Time: 6 µs (Maximum)
- Zero Code Error: 15 mV (Maximum)
- Full-Scale Error: 0.75% FS (Maximum)
- Supply Power Normal: 0.6 mW at 3 V, 1.6 mW at 5 V (Typical) Power Down: 0.3 µW at 3 V, 0.8 µW at 5 V (Typical)
- Normal: 0.6 mW at 3 V, 1.6 mW at 5 V (Typical)
- Power Down: 0.3 µW at 3 V, 0.8 µW at 5 V (Typical)
产品概述
The DAC102S085 is a full-featured, general-purpose DUAL 10-bit voltage-output
digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes
0.6 mW at 3 V and 1.6 mW at 5 V. The DAC102S085 is packaged in 10-pin WSON and VSSOP packages. The
10-pin WSON package makes the DAC102S085 the smallest DUAL DAC in its class. The on-chip output
amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock
rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz
clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with
standard SPI™, QSPI, MICROWIRE and DSP
interfaces.The reference for the DAC102S085 serves both channels and can vary in voltage between 1 V
and VA, providing the widest possible output dynamic range. The DAC102S085
has a 16-bit input shift register that controls the outputs to be updated, the mode of operation,
the power-down condition, and the binary input data. Both outputs can be updated simultaneously or
individually depending on the setting of the two mode of operation bits.A power-on reset circuit ensures that the DAC output powers up to zero volts and remains
there until there is a valid write to the device. A power-down feature reduces power consumption to
less than a microWatt with three different termination options.The low power consumption and small packages of the DAC102S085 make it an excellent
choice for use in battery-operated equipment.The DAC102S085 is one of a family of pin compatible DACs, including the 8-bit DAC084S085
and the 12-bit DAC122S085. The DAC102S085 operates over the extended industrial temperature range
of 40°C to 105°C.
DAC102S085CISDX 电路图

DAC102S085CISDX 电路图
DAC102S085CISDX 相关产品
- 100301QC
- 100304QC
- 100310QC
- 100311QC
- 100313QC
- 100316QC
- 100322QC
- 100329APC
- 100329DC
- 100336DC
- 100336PC
- 100341QC
- 100351DC
- 100351PC
- 100363QC
- 100364QC
- 100370QC
- 100390QC
- 100398QI
- 11AA010T-I/TT
- 11AA160T-I/TT
- 11LC010T-I/TT
- 11LC020T-I/TT
- 11LC040T-E/TT
- 11LC160T-E/TT
- 1ED020I12-F
- 2304NZGI-1LF
- 23A640-I/SN
- 23K256-I/SN
- 23K256-I/ST