1655

1 LTC1655/LTC1655L 16-Bit Rail-to-Rail Micropower DACs in SO-8 Package n 16-Bit Monotonicity Over Temperature n Deglitched Rail-to-Rail Voltage Output n SO-8 Package n I CC(TYP) : 600m A n Internal Reference: 2.048V (LTC1655) 1.25V (LTC1655L) n Maximum DNL Error: – 1LSB n Settling Time: 20m S to – 1LSB n 750kHz Max Update Rate n Power-On Reset to Zero Volts n 3-Wire Cascadable Serial Interface n Low Cost n Pin Compatible Upgrade for LTC1451 12-Bit DAC Family The LTC ? 1655/LTC1655L are rail-to-rail voltage output, 16-bit digital-to-analog converters in an SO-8 package. They include an output buffer and a reference. The 3-wire serial interface is compatible with SPI/QSPI and MICROWIRE TM protocols. The CLK input has a Schmitt trigger that allows direct optocoupler interface. The LTC1655 has an onboard 2.048V reference that can be overdriven to a higher voltage. The output swings from 0V to 4.096V when using the internal reference. The typical power dissipation is 3.0mW on a single 5V s

1655/ 56- Series XMD MSA-compatible 10 Gb/s Cooled EML TOSA Product Brief Description The 1655 (40km) and 1656 (80km) - Series XMD MSA com- patible 10 Gb/s transmitter optical subassembly (TOSA) integrates a high-speed electroabsorptive (EML) laser, a monitor photodiode and a micro-TEC in a small form- factor metallized ceramic package. It is designed for use in SFP+ 10Gb/s transceivers and other types of optical modules for high-speed telecommunication and data ap- plications. The 1655/ 56 -Series is available in the full range of C-band ITU-T wavelengths operating at 10 Gb/s per channel. The device exhibits excellent wavelength stability, supporting operation at 100 GHz channel spacing over 20 years (as- suming an end-of-life aging condition of <±90 pm), with low hazard rates (~100FIT wearout over 20 yrs.). 1655/ 56 -Series uses Avagos’ newest iteration of EML chip, which operates at a higher temperature than its predeces- sor, and therefore reduces TEC power dissipation wh

AC Power Supplies Models 1653A & 1655A Data Sheet www.bkprecision.com Technical data subject to change ? B&K Precision Corp. 2015 v030515 Variable Isolated AC Power Supplies 1653A Features Variable isolated 0-150 VAC 2 A continuous output Displays voltage or current readings Isolation transformer to eliminate shock hazard while servicing “hot chassis” equipment 1655A Features Variable-isolated output 0-150 VAC 3 A continuous, 4 A intermittent output Built-in soldering iron temperature control Expanded leakage scale Circuit breaker overload protection Displays V , A, VA, leakage Specifications 1653A 1655A Voltage Adjustment Range 0-150 VAC with input at 120 VAC Output Isolation Leakage less than 0.1 mA (25°C, 50% RH) Current Range 0-2 A 0-3 A Maximum Current (Isolated) 2 A continuous (0-130 V) 3 A continuous, 4 A intermittent (0-130 V) Peak Current (inrush) N/A 30 A max. (inrush limited to one cycle at 30 A) Voltage/Current Sensing Sine wave average, calibrated i

15 Position D-Sub, High Density Plug, Male Pins Connector, Panel Mount Solder Cup

Receptacle for Female Contacts Housing D-Sub, Combo Connector 2 (Coax or Power) Position

Plug for Male Contacts Housing D-Sub, Combo Connector 3 (Coax or Power) Position

D-Sub Contact Female Socket, Right Angle Gold Coaxial Cable Solder Machined

9 Position Two Piece Backshell Connector Silver 45° Shielded

15 Position Two Piece Backshell Connector Silver 180° Shielded

Bench Power Supply; Power Supply Type:Bench; Output Current:4A; Power Rating:600VA; Supply Voltage:120VAC; Calibrated:No ;RoHS Compliant: NA