1626

; Color:Blue; Body Material:Vinyl; Roll Length:12.19m; External Width:24"; Thickness:0.1" ;RoHS Compliant: NA

DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com PHONE (909) 627-8178 FAX (909) 627-7449 DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407 PHONE (781) 821-8370 FAX (781) 575-0172 DATE: 5/01 DESCO INDUSTRIES INC. Employee Owned MATERIAL TYPE B DRAWING PM-78 STATFREE ? MATERIAL, VINYL, DISSIPATIVE, HOMOGENEOUS, .100" (2.5MM) Description: This reversible vinyl material has a smooth finish on one side and a non- glare finish on the other. It may be used as a table or floor mat, with either side up. To extend life of mat, it can be turned over when one side is worn. Statfree ? Type B is manufactured without any ozone depleting substances, and in accordance with the Montreal Protocol. Blue, Brown, Beige Electrical Properties: Property Test Method Value RTG Resistance: ESD S4.1 10 9 - 10 10 Ohms RTT Resistance: ESD S4.1 10 9 - 10 10 Ohms Electrical Properties obtained by testing to industrial standards by an independent testing laboratory @ 100 Volts and

Product catalogue | PCB connection systems | PCB plug-in connectors | Pitch 5.00 / 5.08 mm (0.197 / 0.200 inch) | Plug connectors, solder connection, pitch 5.00/5.08 | SL 5.00-5.08/90 | SL 5.00/90 - 1 - General ordering data Order No. 1626000000 Part designation SL 5.00/3/90 4.5SN SW Version PCB plug-in connector, Male connectors, Soldered connection, Pitch: 5.00 mm, No. of poles: 3, 90°, Box EAN 4008190197308 Qty. 100 pc(s). System parameters Fitted to PCB Soldered connection Outgoing elbow 90° Pitch 5 mm Pitch in inch 0.197 inch No. of poles 3 Solder pin length 4.5 mm Can be coded Yes No. of rows 1 No. of solder pins per pole 1 Dia. of fitting hole 1.3 mm Fitting hole tolerance + 0.1 mm L1 in mm 10 mm L1 in inch 0.394 inch Insulation resistance 1 MΩ Electric shock protection to DIN VDE 0470 IP20 plugged Electric shock protection to DIN VDE 0470 Safe from finger touch, plugged Material data Insulating material PBT Colour black colour chart Similar to RAL 9011 Insulating materia

Datasheet Creation date June 17, 2010 5:46:49 PM CEST Last update 03.05.2010 / We reserve the right to make technical changes. 1 System pitch 5.08 mm (0.200 inch) BLZP 5.08/12/180 SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstra?e 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-2083 General ordering data Order No. 1943910000 Part designation BLZP 5.08/12/180 SN BK BX Version PCB plug-in connector, female plug, 5.08 mm, No. of poles: 12, 180°, Clamping yoke connection, Clamping range, max.: 4 mm2, Box GTIN (EAN) 4032248618040 Qty. 36 pc(s). Packaging Box Female connectors with clamping yoke screw connection for conductor connection with straight (180°) outlet direction. The female connectors provide space for labelling and can be coded. Can be fastened with flange or release latch. They feature an integrated plus/minus screw, protection against false insertion under clamping yoke. They are delivered with an opened clamping yoke. ? 0.2-2.5 mm2 (IEC)

DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 FAX (909) 627-7449 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 FAX (781) 575-0172 Date: December 2011 Drawing Number PM-78 STATFREE B? MATERIAL, VINYL, DISSIPATIVE, HOMOGENEOUS, .100" & .060" Description: Statfree B? meets the minimum recommended worksurface requirement of ANSI/ESD S20.20 of <10E9 ohms. This extruded homogeneous vinyl dissipative material can be used with either side up. One side has a smooth surface which is easy-to-clean and maintain, and the other has a non-glare finish which makes it easier to identify small parts. Statfree B? is easy to cut to configure to fit your requirements. The material is dimensionally stable with minimum shrinkage or curling. Statfree B? has excellent color stability, minimizing discoloration. The 0.100" thick is a better value, providing a longer life and is ideal for general purpose worksurface matting.

Ultra High Precision Foil Wraparound Surface Mount Chip Resistor with TCR of ± 0.05 ppm/°C and Power Coefficient of 5 ppm at Rated Power and Load Life Stability of ± 0.005 % (50 ppm) VSMP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil) Vishay Foil Resistors Document Number: 63060 For any questions, contact: foil@vishaypg.com www.foilresistors.com Revision: 25-Mar-10 1 INTRODUCTION VSMP Series is the industry’s first device to provide high rated power, excellent load life stability along with extremely low TCR all in one resistor. One of the most important parameters influencing stability is the temperature coefficient of resistance (TCR). Although the TCR of foil resistors is considered extremely low, this characteristic has been further refined over the years. The VSMP Series utilizes ultra high precision Bulk Metal ? Z-foil. The Z-foil technology provides a significant reduction of the resistive element’s sensitivity to ambient temperature variations (TCR) and to self heating when

Pin Receptacle Connector 0.025" ~ 0.037" (0.64mm ~ 0.94mm) No Tail Solder

This document was generated on 05/16/2012 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION Part Number: 39-30-1060 Status: Active Overview: Mini-Fit Jr.? Description: 4.20mm Pitch Mini-Fit Jr.? Header, Dual Row, Right Angle, with Snap-in Plastic Peg PCB Lock, 6 Circuits, PA Polyamide Nylon 6/6 94V-2, Tin (Sn) Plating Documents: 3D Model Packaging Specification SPK-5569-NA2 (PDF) Drawing (PDF) Test Summary TS-5556-002 (PDF) Product Specification PS-5556-001 (PDF) RoHS Certificate of Compliance (PDF) Packaging Specification PK-5569-002 (PDF) Agency Certification CSA LR19980 TUV R72081037 UL E29179 General Product Family PCB Headers Series 5569 Application Power, Wire-to-Board Comments Current = 13A max. per circuit when header is mated to a receptacle loaded with 45750 Mini-Fit? Plus HCS Crimp Terminal Crimped to 16 AWG wire., See Molex Product specification PS-5556001 for additional current de-rating information. Overview Mini-Fit Jr.? Product Name Mini-Fit Jr.? Physical Breakaway

DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 FAX (909) 627-7449 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 FAX (781) 575-0172 Date: December 2011 Drawing Number PM-78 STATFREE B? MATERIAL, VINYL, DISSIPATIVE, HOMOGENEOUS, .100" & .060" Description: Statfree B? meets the minimum recommended worksurface requirement of ANSI/ESD S20.20 of <10E9 ohms. This extruded homogeneous vinyl dissipative material can be used with either side up. One side has a smooth surface which is easy-to-clean and maintain, and the other has a non-glare finish which makes it easier to identify small parts. Statfree B? is easy to cut to configure to fit your requirements. The material is dimensionally stable with minimum shrinkage or curling. Statfree B? has excellent color stability, minimizing discoloration. The 0.100" thick is a better value, providing a longer life and is ideal for general purpose worksurface matting.

CONN SOCKET BLOCK LOCK BLACK