15KPA18

TVS DIODE 180VWM 288.5VC AXIAL

111 ?2009 Littelfuse, Inc. Speci?cations are subject to change without notice. T ransient Voltage Suppression Diodes Revision: January 09, 2009 Axial Leaded – 15000W > 15KPA series 15KPA Series Please refer to http://www.Littelfuse.com/series/15KPA.html for current information. 15KPA Series AGENCY AGENCY FILE NUMBER E128662/E230531 15KPA Series TVS devices are ideal for the protection of I/O interfaces, V CC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. Applications Features The 15KPA Series is designed speci?cally to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Description Parameter Symbol Value Unit Peak Pulse Power Dissipation by 10x1000μs test waveform (Fig.1) (Note 1) P PPM 15000 W Steady State Power Dissipation on ini?nite heat sink at T L =75oC (Fig. 5) P D 8.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirection

Glass passivated junction 15000W peak pulse power capability on 10/1000us waveform Excellent clamping capability Repetition rate(duty cycle) : 0.05% Low incremental surge resistance Fast response time: typically less than 1.0ps from 0 Volts to BV, Bidirectonal less than 10 ns High temperature soldering guaranteed: 265°C/10 seconds/.375", (9.5mm) lead length,51bs.(2.3kg) tension Case: Molded plastic over glass passivated junction , Method 2026 Polarity: Color band denotes positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.07 ounce, 2.5 grams SYMBOL VALUE UNITS P PPM Minimum 15000 Watts I PPM SEE TABLE 1 Amps P M(AV) 8 Watts I FSM 400 Amps T J , T STG -55 to + 175 Electrical characteristics apply in both directions Plastic package RATING Peak Pulse Power Dissipation on 10/1000s waveform (Note 1,FIG.1) Peak Pulse Current of on 10/1000s waveform (Note 1,FIG.3) Terminal: Plated Axial leads, solderable per MIL-ST

FEATURES MECHANICAL DATA DEVICES FOR BIPOLAR APPLICATION ? Plastic package. ? Glass passivated junction. ? 15 ,000W Peak Pulse Power capability on 10/1000μs waveform. ? Excellent clamping capability. ? Repetition rate (duty cycle): 0.05%. ? Low incremental surge resistance. ? Fast response time: typically less than 1.0ps from 0 volt to BV, Bidirectional less than 10ns. ? High temperature soldering guaranteed: 265°C/10 seconds/.375", (9.5mm) lead length, 5lbs, (2.3kg) tension. M M 6 Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 ? per Fig. 2. 2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum. RATING SYMBOL VALUE UNIT Peak Pulse Power Dissipation on 10/1000 ? s waveform. (Note 1 ?Fig. 1) P PPM Minimum 15 ,000 Watts Peak Pulse Current on 10/1000 ? s waveform. (Note 1 ?Fig. 3) I

Transient Voltage Suppressors 15KPA Series ELECTRONICS CircuitProtection System Speci?cations are subject to change without notice. Please refer to http://www.ruilon.com for current information.

Axial Lead Transient Voltage Suppressors (TVS) Revision September 25, 2013 1 / 5 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. 15KPA Series 17 To 280 V 15000W SOCAY Electronics Co., Ltd. www.socay.com The 15KPA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Bi-directional u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 15000W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to V BR min u Typical I R less than 2μA above 40V. u Hig

www.socay.com 1 Surface Mount Transient Voltage Suppressors (TVS) SMF Series 5.0 To 190 V 200W Uni-directional Bi-directional u Compatible with industrial standard package SOD-123 u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 200W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to V BR min u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔV BR = 0.1% × V BR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead–free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-610

UNI-POLAR BI-POLAR 15KPA17A 15KPA17CA 17 18.99 20.79 50 515.4 5000 29.3 15KPA18A 15KPA18CA 18 20.11 22.01 50 488.7 5000 30.9 15KPA20A 15KPA20CA 20 22.34 24.46 20 440.2 1500 34.3 15KPA22A 15KPA22CA 22 24.57 26.91 10 407.0 500 37.1 15KPA24A 15KPA24CA 24 26.81 29.35 5 371.0 150 40.7 15KPA26A 15KPA26CA 26 29.04 31.80 5 343.2 50 44.0 15KPA28A 15KPA28CA 28 31.28 34.24 5 317.9 25 47.5 15KPA30A 15KPA30CA 30 33.51 36.69 5 297.8 15 50.7 15KPA33A 15KPA33CA 33 36.9 40.4 5 276.1 2 54.7 15KPA36A 15KPA36CA 36 40.2 44.0 5 252.5 2 59.8 15KPA40A 15KPA40CA 40 44.7 48.9 5 229.5 2 65.8 15KPA43A 15KPA43CA 43 48.0 52.6 5 216.3 2 69.8 15KPA45A 15KPA45CA 45 50.3 55.0 5 207.4 2 72.8 15KPA48A 15KPA48CA 48 53.6 58.7 5 194.3 2 77.7 15KPA51A 15KPA51CA 51 57.0 62.4 5 182.1 2 82.9 15KPA54A 15KPA54CA 54 6

12/9/2013 FEATURES ? Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ? Glass passivated junction ? 15000W Peak Pulse Power capability on 10/1000 μs waveform ? Excellent clamping capability ? Repetition rate (duty cycle):0.05% ? Low incremental surge resistance ? Fast response time: typically less than 1.0 ps from 0 volts to BV ? High temperature soldering guaranteed: 265°C/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension MECHANICAL DATA Case:Molded plastic over glass passivated junction Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.07 ounce, 2.1 gram Ratings at 25°C ambient temperature unless otherwise specified. RATING SYMBOL VALUE UNITS Peak Pulse Power Dissipation on 10/1000 μs waveform (NOTE 1) Peak Pulse Current of on 10-1000 μs waveform (NOTE 1) Steady State Power Dissipat

15KP A17A thru 15KP A280A 1 05024.R10 1/06 www .protekdevices.com POWER TVS COMPONENT Only One Name Means ProT ek’Tion? APPLICA TIONS ? Relay Drives ? Motor (Start/Stop) Back EMF Protection ? Module Lightning Protection ? Secondary Lightning Protection for AC/DC IEC COMPA TIBILITY (EN61000-4) ? 61000-4-5 (Surge): 48A, 8/20μs - L3 (Line-Gnd), L4 (Line-Line) & L1 (Power) FEA TURES ? 15,000 Watts Peak Pulse Power per Line (tp=10/1000μs) ? Unidirectional & Bidirectional Configurations ? Easy Mounting to Printed Circuit Board ? Available in Multiple Voltage Types Ranging From: 17V to 220V ? RoHS Compliant in Lead-Free Versions (Exemption #7) MECHANICAL CHARACTERISTICS ? Molded Case ? Weight 5 grams (Approximate) ? Flammability Rating UL 94V-0 ? Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ? Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ? Marking: Logo, Part Number & Date Code ? Positive Terminal Marked with Band - Unidirecti