15EMC3

RFI POWER LINE FILTER, 15A, 1.52mA; Filter Type:RFI; Current Rating:15A; Voltage Rating:250VAC; Leakage Current Max:1.52mA; Capacitance:3.005μF; Inductance Min:1.04mH; Termination Type:Wire Leads; Terminal Type:Wire Leaded ;RoHS Compliant: Yes

Compact and Cost Effective Dual Stage RFI Power Line Filters The EMC series of RFI filters has been developed to reduce conducted noise to acceptable limits for equipment that must comply with the requirements of CISPR in Europe and the FCC specifications in the USA. The EMC series is the most compact dual stage filter available from Tyco Electronics. This cost effective design has a maximum current rating of 30 amps; higher than any similar catalog product. The EMC series was designed to address the need for more differential mode attenuation in the lower frequency range while still maintaining high common mode performance. This type of performance is typically needed for motor drives and switch mode power supplies with increased operating frequencies. The EMC series is ideal for applications that require a high level of performance in a compact, cost effective package. Specifications Maximum leakage current,each line-to-ground 3,6,10 Amp 15,20,30 Amp @ 120 VAC 60 Hz: .21 mA .73 mA @

Compact and Cost-e?ective Dual Stage RFI Power Line Filters EMC Series 24 EMC Series Dimensions are in inches and millimeters unless otherwise speci?ed. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Speci?cations subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com UL Recognized CSA Certi?ed VDE Approved ? Compact dual stage ?lter series ? Cost-e?ective design ? Current rating up to 30A ? High di?erential mode attenuation in the lower frequency range ? High common mode performance ? Suitable for switching mode power supplies Ordering Information 10 EMC 1 Case Styles 1 – .250 [6.3] spade terminals 3 – Wire leads 6 – Threaded bolt EMC Series Current Rating 3, 6, 10, 15, 20 or 30A Speci?cations Electrical Schematic LINE LOAD Available Part Numbers Maximum leakage current each Line to Ground: 3, 6, 10A 15, 20, 30A @ 120 VAC 60 Hz: .21 mA .73 mA @250