1520

1520 10-TAP DIP/SMD DELAY LINE T D /T R = 5 (SERIES 1520) FEATURES PACKAGES 14 13 12 11 10 9 8 1 2 3 4 5 6 7 GND T1 T3 T5 T6 T8 T10 IN N/C T2 T4 T7 T9 GND ? 10 taps of equal delay increment IN Signal Input T1-T10 Tap Outputs GND Ground Note: Standard pinout shown Other pinouts available ? Delays to 1000ns ? Low profile ? Epoxy encapsulated ? Meets or exceeds MIL-D-23859C FUNCTIONAL DESCRIPTION The 1520-series device is a fixed, single-input, ten-output, passive delay line. The signal input (IN) is reproduced at the outputs (T1-T10) in equal increments. The delay from IN to T10 (T D ) and the characteristic impedance of the line (Z) are determined by the dash number. The rise time (T R ) of the line is 20% of T D , and the 3dB bandwidth is given by 1.75 / T D . The device is available in a 14-pin DIP (1520) or a 14-pin SMD (1520S), and a wide range of pinouts may be specified. Part numbers are constructed according to the scheme shown at right.

28 Fuseholders Specifications Terminals: Copper Alloy/Tin Plated with integral stainless steel reinforcing spring Wire Seal: Silicon Rubber Body: Heat Stabilized Thermoplastic Cover: Transparent Thermoplastic with integral silicon seal Rated: 80A (Dependent on application - contact Littelfuse) Ambient Temp.: -10?C to +80?C *It is recommended that cross linked polyethelene (GLX) insulat- ed wire be used, as described in SAE J1128 (Type, FLY in DIN 76722) or equivalent. Maxi Fuse Splashproof Holder for 20-70 Amp Part Number Description 1520007Z Cover with Intergal seal 1520004Z Body with Mounting Tabs (one tab is slotted) 1520005Z Body with Mounting Tabs 1520006Z Body without Mounting Tabs 868-095 Blue Wire Seal for 1.5-4mm 2 (14-12AWG) Wire 913-064 Single terminal 1.5-4mm 2 (14-12AWG) Wire 913-064-001 Reeled terminals 1.5-4mm 2 (14-12AWG) Wire 868-096 Gray Wire Seal for 4-10mm 2 (10-8AWG) Wire 913-068 Single terminal 4-6mm 2 (10AWG) Wire 913-068-001 Reeled terminals 4-6mm 2 (10AWG)

28 Fuseholders Specifications Terminals: Copper Alloy/Tin Plated with integral stainless steel reinforcing spring Wire Seal: Silicon Rubber Body: Heat Stabilized Thermoplastic Cover: Transparent Thermoplastic with integral silicon seal Rated: 80A (Dependent on application - contact Littelfuse) Ambient Temp.: -10?C to +80?C *It is recommended that cross linked polyethelene (GLX) insulat- ed wire be used, as described in SAE J1128 (Type, FLY in DIN 76722) or equivalent. Maxi Fuse Splashproof Holder for 20-70 Amp Part Number Description 1520007Z Cover with Intergal seal 1520004Z Body with Mounting Tabs (one tab is slotted) 1520005Z Body with Mounting Tabs 1520006Z Body without Mounting Tabs 868-095 Blue Wire Seal for 1.5-4mm 2 (14-12AWG) Wire 913-064 Single terminal 1.5-4mm 2 (14-12AWG) Wire 913-064-001 Reeled terminals 1.5-4mm 2 (14-12AWG) Wire 868-096 Gray Wire Seal for 4-10mm 2 (10-8AWG) Wire 913-068 Single terminal 4-6mm 2 (10AWG) Wire 913-068-001 Reeled terminals 4-6mm 2 (10AWG)

28 Fuseholders Specifications Terminals: Copper Alloy/Tin Plated with integral stainless steel reinforcing spring Wire Seal: Silicon Rubber Body: Heat Stabilized Thermoplastic Cover: Transparent Thermoplastic with integral silicon seal Rated: 80A (Dependent on application - contact Littelfuse) Ambient Temp.: -10?C to +80?C *It is recommended that cross linked polyethelene (GLX) insulat- ed wire be used, as described in SAE J1128 (Type, FLY in DIN 76722) or equivalent. Maxi Fuse Splashproof Holder for 20-70 Amp Part Number Description 1520007Z Cover with Intergal seal 1520004Z Body with Mounting Tabs (one tab is slotted) 1520005Z Body with Mounting Tabs 1520006Z Body without Mounting Tabs 868-095 Blue Wire Seal for 1.5-4mm 2 (14-12AWG) Wire 913-064 Single terminal 1.5-4mm 2 (14-12AWG) Wire 913-064-001 Reeled terminals 1.5-4mm 2 (14-12AWG) Wire 868-096 Gray Wire Seal for 4-10mm 2 (10-8AWG) Wire 913-068 Single terminal 4-6mm 2 (10AWG) Wire 913-068-001 Reeled terminals 4-6mm 2 (10AWG)

28 Fuseholders Specifications Terminals: Copper Alloy/Tin Plated with integral stainless steel reinforcing spring Wire Seal: Silicon Rubber Body: Heat Stabilized Thermoplastic Cover: Transparent Thermoplastic with integral silicon seal Rated: 80A (Dependent on application - contact Littelfuse) Ambient Temp.: -10?C to +80?C *It is recommended that cross linked polyethelene (GLX) insulat- ed wire be used, as described in SAE J1128 (Type, FLY in DIN 76722) or equivalent. Maxi Fuse Splashproof Holder for 20-70 Amp Part Number Description 1520007Z Cover with Intergal seal 1520004Z Body with Mounting Tabs (one tab is slotted) 1520005Z Body with Mounting Tabs 1520006Z Body without Mounting Tabs 868-095 Blue Wire Seal for 1.5-4mm 2 (14-12AWG) Wire 913-064 Single terminal 1.5-4mm 2 (14-12AWG) Wire 913-064-001 Reeled terminals 1.5-4mm 2 (14-12AWG) Wire 868-096 Gray Wire Seal for 4-10mm 2 (10-8AWG) Wire 913-068 Single terminal 4-6mm 2 (10AWG) Wire 913-068-001 Reeled terminals 4-6mm 2 (10AWG)

28 Fuseholders Specifications Terminals: Copper Alloy/Tin Plated with integral stainless steel reinforcing spring Wire Seal: Silicon Rubber Body: Heat Stabilized Thermoplastic Cover: Transparent Thermoplastic with integral silicon seal Rated: 80A (Dependent on application - contact Littelfuse) Ambient Temp.: -10?C to +80?C *It is recommended that cross linked polyethelene (GLX) insulat- ed wire be used, as described in SAE J1128 (Type, FLY in DIN 76722) or equivalent. Maxi Fuse Splashproof Holder for 20-70 Amp Part Number Description 1520007Z Cover with Intergal seal 1520004Z Body with Mounting Tabs (one tab is slotted) 1520005Z Body with Mounting Tabs 1520006Z Body without Mounting Tabs 868-095 Blue Wire Seal for 1.5-4mm 2 (14-12AWG) Wire 913-064 Single terminal 1.5-4mm 2 (14-12AWG) Wire 913-064-001 Reeled terminals 1.5-4mm 2 (14-12AWG) Wire 868-096 Gray Wire Seal for 4-10mm 2 (10-8AWG) Wire 913-068 Single terminal 4-6mm 2 (10AWG) Wire 913-068-001 Reeled terminals 4-6mm 2 (10AWG)

28 Fuseholders Specifications Terminals: Copper Alloy/Tin Plated with integral stainless steel reinforcing spring Wire Seal: Silicon Rubber Body: Heat Stabilized Thermoplastic Cover: Transparent Thermoplastic with integral silicon seal Rated: 80A (Dependent on application - contact Littelfuse) Ambient Temp.: -10?C to +80?C *It is recommended that cross linked polyethelene (GLX) insulat- ed wire be used, as described in SAE J1128 (Type, FLY in DIN 76722) or equivalent. Maxi Fuse Splashproof Holder for 20-70 Amp Part Number Description 1520007Z Cover with Intergal seal 1520004Z Body with Mounting Tabs (one tab is slotted) 1520005Z Body with Mounting Tabs 1520006Z Body without Mounting Tabs 868-095 Blue Wire Seal for 1.5-4mm 2 (14-12AWG) Wire 913-064 Single terminal 1.5-4mm 2 (14-12AWG) Wire 913-064-001 Reeled terminals 1.5-4mm 2 (14-12AWG) Wire 868-096 Gray Wire Seal for 4-10mm 2 (10-8AWG) Wire 913-068 Single terminal 4-6mm 2 (10AWG) Wire 913-068-001 Reeled terminals 4-6mm 2 (10AWG)

28 Fuseholders Specifications Terminals: Copper Alloy/Tin Plated with integral stainless steel reinforcing spring Wire Seal: Silicon Rubber Body: Heat Stabilized Thermoplastic Cover: Transparent Thermoplastic with integral silicon seal Rated: 80A (Dependent on application - contact Littelfuse) Ambient Temp.: -10?C to +80?C *It is recommended that cross linked polyethelene (GLX) insulat- ed wire be used, as described in SAE J1128 (Type, FLY in DIN 76722) or equivalent. Maxi Fuse Splashproof Holder for 20-70 Amp Part Number Description 1520007Z Cover with Intergal seal 1520004Z Body with Mounting Tabs (one tab is slotted) 1520005Z Body with Mounting Tabs 1520006Z Body without Mounting Tabs 868-095 Blue Wire Seal for 1.5-4mm 2 (14-12AWG) Wire 913-064 Single terminal 1.5-4mm 2 (14-12AWG) Wire 913-064-001 Reeled terminals 1.5-4mm 2 (14-12AWG) Wire 868-096 Gray Wire Seal for 4-10mm 2 (10-8AWG) Wire 913-068 Single terminal 4-6mm 2 (10AWG) Wire 913-068-001 Reeled terminals 4-6mm 2 (10AWG)

MAXI Fuse In-Line Fuseholder

29 MAXI ? Fuse In-Line Fuseholder The In-Line Fuseholder provides an efficient, simple installation method for MAXI ? Fuse applications. Specifications Terminal: Copper Alloy Body: Black Thermoplastic (UL94HB) Cover: Translucent Thermoplastic Ambient Temp.: -10?C to +80?C Maximum number of fuseblocks tied together is two for all ratings, up to and including 50A. Fuseholders Part Number Description 152001 Fuseholder-Rated at 60A 152900 Cover 913-653 Ring tongue terminal for 2.5-6mm 2 (12-10AWG) wire* 913-654 Ring tongue terminal for 5-10mm 2 (10-8 AWG) wire* 913-550 M5 x 8 Screw per DIN 7985-4.8 MAXI ? Fuse In-Line Fuseholder With Protective Cap Supplied with two 6” leads - 6 gauge wire for up to 60 amp MAXI ? Fuse applications, this In-Line Fuseholder also provides a protective cover for harsh under-the-hood environments. Mounting hole also permits easy bulkhead installation. Part Number: MAH 1 ATO ? Blade Fuse Splashproof In-Line Fuseholder The Splashproof Fuseholder provid