1507

10-TAP SIP DELAY LINE TD/TR = 5

1507 Doc #97025 DATA DELAY DEVICES, INC. 1 2/6/97 3 Mt. Prospect Ave. Clifton, NJ 07013 10-TAP SIP DELAY LINE T D /T R = 5 (SERIES 1507) FEATURES PACKAGES ? 10 taps of equal delay increment ? Very narrow device (SIP package) ? Stackable for PC board economy ? Low profile ? Epoxy encapsulated ? Meets or exceeds MIL-D-23859C FUNCTIONAL DESCRIPTION The 1507-series device is a fixed, single-input, ten-output, passive delay line. The signal input (IN) is reproduced at the outputs (T1-T10) in equal increments. The delay from IN to T10 (T D ) is given by the device dash number. The characteristic impedance of the line is given by the letter code that follows the dash number (See Table). The rise time (T R ) of the line is 1 0% of T D , and the 3dB bandwidth is given by 3.5 / T D . SERIES SPECIFICATIONS ? Dielectric breakdown: 50 Vdc ? Distortion @ output: 10% max. ? Operating temperature: -55 ° C to +125 ° C ? Storage temperature: -55 ° C to +125 ° C ? Temperature coefficient: 100 PPM/

Normal Wall Flame Retardant Heat Shrink Tubing Page <1> 05/04/12 V1.1 www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Features: ? Flexible, general purpose, polyolefin tubing ? 2:1 shrink ratio ? Super abrasion and solvent resistance ? Excellent physical, chemical and electrical properties ? Wide range of sizes and colours ? Operating temperature range : -55°C to 125°C Specifications: Physical: Tensile Strength : 14.8 Mpa Elongation : 460% Tensile Strength After Aging : 14.5Mpa Elongation After Aging : 480% Electrical: Dielectric Strength : 17 KV / mm Volume Resistance : 1 × 10 15 ? cm Chemical: Corrosion UL 224 (158C × 168 hours) Pass; Copper Stability UL 224 (158C × 168 hours) Pass

Normal Wall Flame Retardant Heat Shrink Tubing Page <1> 05/04/12 V1.1 www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Features: ? Flexible, general purpose, polyolefin tubing ? 2:1 shrink ratio ? Super abrasion and solvent resistance ? Excellent physical, chemical and electrical properties ? Wide range of sizes and colours ? Operating temperature range : -55°C to 125°C Specifications: Physical: Tensile Strength : 14.8 Mpa Elongation : 460% Tensile Strength After Aging : 14.5Mpa Elongation After Aging : 480% Electrical: Dielectric Strength : 17 KV / mm Volume Resistance : 1 × 10 15 ? cm Chemical: Corrosion UL 224 (158C × 168 hours) Pass; Copper Stability UL 224 (158C × 168 hours) Pass

Single-In-Line Delay Lines

Single-In-Line Delay Lines

Single-In-Line Delay Lines

Single-In-Line Delay Lines