1446

For technical questions in the Americas, contact foilsupport1@vishay.com For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com ? ISRAEL: foilsales.israel@vishay.com ? FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com ? AMERICAS: foilsales.usa@vishay.com ? ASIA/JAPAN: foilsales.asia@vishay.com ? UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com ? GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com SALES Document Number: 63032 Revision 08-Mar-05 www.vishay.com 126 1442, 1445, 1446 Vishay Foil Resistors THROUGH HOLE Bulk Metal ? Foil Technology Dual-In-Line Hermetic Resistor Networks 5 4 7 6 1 8 2 3 8 7 6 5 1 2 3 4 NOTE: Usable area is represented by the dotted lines— a rectangle 0.150 Inches x 0.200 Inches. Illustrations not to scale. Chips shown undersize for clarity. Drawing view is from the top looking down into the pack

1 LTC1446/LTC1446L APPLICATIO S U DESCRIPTIO U FEATURES TYPICAL APPLICATION U Dual 12-Bit Rail-to-Rail Micropower DACs in SO-8 n Dual DACs with 12-Bit Resolution n SO-8 Package n Rail-to-Rail Output Amplifiers n Internal Reference n Maximum DNL Error: 0.5LSB n 3V Operation (LTC1446L): I CC = 650m A Typ n 5V Operation (LTC1446): I CC = 1000m A Typ n Settling Time: 14m s to – 0.5LSB n Power-On Reset Clears DACs to 0V n 3-Wire Cascadable Serial Interface with 500kHz Update Rate n Schmitt Trigger On Input Allows Direct Optocoupler Interface n Low Cost The LTC ? 1446/LTC1446L are dual 12-bit digital-to-analog converters (DACs) available in an SO-8 package. They are complete with a rail-to-rail voltage output amplifier, an internal reference and an easy-to-use 3-wire cascadable serial interface. The LTC1446 has an internal reference and a full-scale output of 4.095V. It operates from a single 4.5V to 5.5V supply. The LTC1446L has an internal reference and a full-scale output of 2.5V. It o

105 5305 Spectrum Drive, Frederick, MD 21703-7362 s TEL: 301-846-9222, 800-638-2048 s Fax: 301-846-9116 web: www.weinschel .apitech.com s email: weinschel-sales@ apitech.com Revision Date: 08/03/2016 Terminations & Loads NOTE: All dimensions are given in mm (inches) and tolerances are X.X+0.8 (0.3) unless otherwise specified. Model 1446 25 Watts Medium Power, 7/16 Connectors dc to 6.0 GHz Low Intermodulation Design Features o Optimized for Wireless OEM and Test Applications. o Designed to meet environmental requirements of MIL-D-39030. o Custom Designs Available. Specifications NOMINAL IMPEDANCE: 50 Ω FREQUENCY RANGE: dc to 6.0 GHz MAXIMUM SWR: Frequency (GHz) SWR dc - 6 1.20 POWER RATING: (mounted horizontally assuming unobstructed air flow and natural convection around unit: 25 watts average @ 25°C ambient temperature, derated linearly to 2.5 watts @ 125°C. 5 kilowatts peak (5 μsec pulse width; 0.25% duty cycle). INTERMODULATION: IM3 (Reflected) = -100 dBc with two +41 dB

≤ Anforderungsstufe 1 Performance Level 1 Kontaktbereich vergoldet Mating Area gold plating Anschlussbereich verzinnt 4-6μm Terminal Area 4-6μm tin plating Koplanarit?t der Anschlüsse ≤ 0,1mm Coplanarity Area of Termination 0,1mm 330 150 44,5 Verpackungseinheit: 400 Stück - Verpackt in Gurtverpackung - Tape on Reel Packaging Packaging unit: 400 pcs Abspulrichtung - Reel off Direction Ansaughaube hood 0,6 0,5 6,5 4,5 26 26,55 A3 prior notice. contact one of the ERNI companies Date 21.09.2010 h Index MSPEED Female 4mm SMD, 50 contacts Federleiste 4mm SMD, 50 polig 144662 5:1 Information: Tolerances Scale All Dimensions I www.ERNI.com Designation Class in mm before using. Drawing will not be updated. Subject to modification without All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Leiterplatten-Layout Vorschlag / 1.) 1.) PCB-Layout Prop

≤ Anforderungsstufe 1 Performance Level 1 Kontaktbereich vergoldet Mating Area gold plating Anschlussbereich verzinnt 4-6 μm Terminal Area 4-6 μm tin plating Koplanarit?t der Anschlüsse ≤ 0,1 mm Coplanarity Area of Termination 0,1 mm Abspulrichtung - Reel off Direction 330 150 44,5 Tape on Reel Packaging Verpackungseinheit: 400 Stück - Verpackt in Gurtverpackung - Packaging unit: 40 pcs Ansaughaube hood 6,5 26,55 26 0,5 6,6 0,6 4,5 prior notice. contact one of the ERNI companies Date 21.09.2010 i Index MSPEED Female 4mm THR, 50 contacts Federleiste 4mm THR, 50 polig 144663 5:1 Information: Tolerances Scale All Dimensions in mm Class I Subject to modification without A3 Designation www.ERNI.com before using. Drawing will not be updated. All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. a1 b25 b1 a25 24 24 x 1 = 1 1,5 3,85 26,55 25,3 4

SAC-12P-MS/2,0-35T/MSSHSCO

 
     
   SCLS068E ? NOVEMBER 1988 ? REVISED AUGUST 2003 1 POST OFFICE BOX 655303 ? DALLAS, TEXAS 75265
Operating Voltage Range of 4.5 V to 5.5 V
Outputs Can Drive Up To 10 LSTTL Loads
Low Power Consumption, 80-μA Max I CC
Typical t pd = 12 ns
±4-mA Output Drive at 5 V
Low Input Current of 1 μA Max
Inputs Are TTL-Voltage Compatible
Contain Eight D-Type Flip-Flops
Direct Clear Input
Applications Include: ? Buffer/Storage Registers ? Shift Registers ? Pattern Generators 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 CLR 1Q 1D 2D 2Q 3Q 3D 4D 4Q GND V CC 8Q 8D 7D 7Q 6Q 6D 5D 5Q CLK SN54HCT273 ...J OR W PACKAGE SN74HCT273 . . . DB, DW, N, NS, OR PW PACKAGE (TOP VIEW) 3 212019 910 11 1213 4 5 6 7 8 18 17 16 15 14 8D 7D 7Q 6Q 6D 2D 2Q 3Q 3D 4D 1D 1Q CLR 5Q 5D 8Q 4Q GND CLK V CC SN54HCT273 . . . FK PACKAGE (TOP VIEW) description/ordering information These devices are positive-edge-triggered D-type flip-flops with a com

330 Verpackt im Gurt nach DIN IEC 60286-3 Tape on Reel Packaging according to DIN IEC 60286-3 Verpackungseinheit: 400 Stück Packaging unit: 400 pcs 2,9 Abspulrichtung - Reel off Direction ≤ Anforderungsstufe 1 Performance Level 1 Kontaktbereich vergoldet Mating Area gold plating Anschlussbereich verzinnt 4-6 μm Terminal Area 4-6 μm tin plating Koplanarit?t der Anschlüsse ≤ 0,1 mm Coplanarity Area of Termination 0,1 mm Angsaughaube hood 26,95 4,8 0,65 26 8,95 0,5 7,07 0,6 6,42 0,8 4,6 1,62 5,85 3,675 Leiterplatten-Layout Vorschlag / Drill tool 1) PCB-Layout proposal 1.) Durchmesser des Bohrers / 1) 0,5 1 ±0,03 3 24 8 x 3 = 24 24 x 1 = 26 0,85 0,7 1 ±0,03 0,9 4,45 0,8 0,65 1,5 0,7 ±0,03 0,85 a1 16 44 a25 b25 b1 a1 1 24 x 1 = 24 1,5 A3 prior notice. contact one of the ERNI companies Date 28.01.2014 m Index MSPEED Male 1mm SMD, 50 contacts Messerleiste 1mm SMD, 50 polig 144680 5:1 Information: Tolerances Scale All Dimensions I www.ERNI

2,9 Abspulrichtung - Reel off Direction ≤ 0,1 mm Coplanarity Area of Termination ≤ Anforderungsstufe 1 Performance Level 1 Kontaktbereich vergoldet Mating Area gold plating Anschlussbereich verzinnt 4-6 μm Terminal Area 4-6 μm tin plating Koplanarit?t der Anschlüsse 0,1 mm 330 Verpackt im Gurt nach DIN IEC 60286-3 Tape on Reel Packaging according to DIN IEC 60286-3 Verpackungseinheit: 400 Stück Packaging unit: 400 pcs A3 prior notice. contact one of the ERNI companies Date 28.01.2014 n Index MSPEED Male 1mm THR, 50 contacts Messerleiste 1mm THR, 50 polig 144681 5:1 Information: Tolerances Scale All Dimensions I www.ERNI.com Designation Class in mm before using. Drawing will not be updated. Subject to modification without All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. a25 b25 b1 a1 1,5 24 x 1 = 24 1 1,2 4,6 0,15 5,85 0,8 1,62 6,42

XXXXXXX ERNI 144693 Date Code Firmensignet Ident-Nr. not plated thru 2 20 10 x 2 = 3,7 1max. 25 max. 2 8 ( ) 4 x 2 = 2 +0,05 3 1) 2 20 ( ) 10 x 2 = 15,4 3 -0,1 13,45 -0,1 2 8 4 x 2 = Anforderungsstufe 2/ class 2 Fehlende Masse und Angaben nach IEC 61076-4-101 Missing information and dimensions per IEC 61076-4-101 1) ? 0,6 Durchmesser des metallisierten Loches ? 0,6 Diameter of finished plated-through hole ? 0,7 Diameter of drilled hole ? 0,7 Bohrungsdurchmesser des Loches ±0,02 ±0,02 ±0,05 ±0,05 Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 Metal plating of plated-through hole see drawing 114406 alle L?cher nicht durchkontaktiert Board hole pattern (Component mounting side ) all holes Index Date Scale Designation Tolerances Consider protection memo from DIN 34 144693 ERmet Messerleiste C ERmet Male Wide Type C 2:1 I All rights reserved. Only for information. To insure that this is the latest version of this drawing, please conta