13394

1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 WIRING DIAGRAM 20,60 -0,40 +0,40 0,811 -0,016 +0,016 TOP OF PCB LP RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 14,85 ±0,05 0,585 ±0,002 19,45 0,15 0,740 17,54 ( 0,330 18,80 ) 0,691 8,37 0,635 16,13 0,752 19,09 1,55 0,061 1 8 [in] OBERFL?CHEN- PART NO. 133421 0,8μm Au [30μin], OVER Ni NOTE 2 : RECOMMENDED PANEL THICKNESS 1.6 mm [0.062"] CONTACT FINISH BEHANDLUNG NOTE 3 : RoHS COMPLIANT NOTE 1 : C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS IDENT. NR. Index Date C 18.09.2008 8 1 0,730 18,54 14,48 0,570 12,10 -0,25 +0,25 0,465 -0,010 +0,010 27,46 1,081 prior notice. contact one of the ERNI companies Proprietary notice pursuant to ISO 16016 to be observed. MJ 8P8C, COUPLER, SHIELDED MOD JACK - MJC 133942 2:1 Information: Tolerances Scale All Dimensions A3 www.ERNI.com Designation Class in mm before using.

IMPROVED CONTACT DESIGN (PRE BEND) 3,05 0,120 0,635 0,025 (acc. to IEC 60068-2-20) CAT 5 wave 260°C at 10s NOTE 3: RoHS COMPLIANT SOLDER NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) 133172 PART NO. ART.- NR. TRANSMISSION PROCESS (LEADFREE) CATEGORY SUITABLE ASSEMBLY BODY [in] x.xx ±0,25 203513 CAT 5 235°C at 3-5s NOTE 1: SIDE SHIELD PINS IN Front 3.05 mm (F) ( MAX) PA6T/66 FR52 30% PBT 30% reflow INSULATION TEMPERTURE Index Date D 13.08.2009 1 8 15,88 0,625 11,43 0,450 2,54 0,100 13,63 0,537 3,20 0,126 10,89 0,429 21,59 MAX 0,850 PCB EDGE LP RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 16,66 0,656 14,72 0,580 0,38 ±0,10 0,015 ±0,004 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 2 4 6 8 1 3 5 7 11,43 0,450 15,49 0,610 1,27 0,050 2,54 0,100 3,05 0,120 2,54 0,100 8,89 0,350 0,89 ±0,07 X8 0,035 ±0,003 1,60 ±0,07 X2 0,063 ±0,003 3,

IMPROVED CONTACT DESIGN (PRE BEND) prior notice. contact one of the ERNI companies MJ 8P8C, 1X4 MOD JACK - MJR 133947 2:1 Information: Tolerances Scale All Dimensions in mm Class I (1/1) Subject to modification without A3 Designation www.ERNI.com before using. Drawing will not be updated. All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. TOP OF PCB LP ±0,20 60,19 ±0,008 0,586 14,89 2,370 0,38 ±0,10 0,015 ±0,004 1 8 1 8 1 8 8 1 53,34 2,73 0,107 2,73 0,107 3,68 0,145 0,350 8,89 2,54 0,100 0,063 X5 ±0,003 X2 ±0,07 3,25 0,035 X32 ±0,003 1,050 26,67 ±0,07 1 ,60 0,400 10,16 ±0,003 0,1 28 0,950 24,13 ±0,07 0,89 38,10 1,500 0,050 1,27 2,050 52,07 0,100 2,54 2,100 10,16 0,400 1:1 STANDOFF ABSTAND 2,100 ±0,005 53,34 ±0,13 21,59 0,850 10,89 0,429 0,543 13,80 3,20 ±0,20 0