13372

MOD JACK - MJIM 8C7T, 1X1, INTEGRATED MAGNETICS MAXMJ 133723 J1 J3 J6 ELECTRICAL SCHEMATIC M3D01 GND P8 1000pF/2KV 4X 75 Ohms P1 CT P5 CT P4 P3 P6 P2 PCB ELEKTRISCHES DIAGRAMM J7,8 J4,5 CABLE J2 (P1-P2 : P3-P6) DCR (P1-P2, P3-P6) 0.9 OHMS MAX 60 - 80 MHz -12 dB MIN 0.1 - 30 MHz -50 dB TYP ISOLATION 1500 Vrms 60 - 100 MHz -35 dB TYP 30 - 60 MHz -40 dB TYP 1-100 MHz -40 dB TYP CMR: CROSSTALK: RETURN LOSS: 50 MHz -13.6 dB MIN INSERTION LOSS: TURNS RATIO: OCL(100 KHz, 0.1 Vrms, 8 mA) MAGNETICS SPECIFICATIONS @ 25°C 0.1-100 MHz -1.1 dB MAX 40 MHz: -15.5 dB MIN 0.5 - 30 MHz: -18 dB MIN AUTO MDIX COMPATIBLE (P1-P2 : J1-J2) (P3-P6 : J3-J6) 1CT : 1 ±3% 1CT : 1 ±3% 350μH MIN NOTE 1: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) NOTE 2: SIDE GROUND TABS REAR OF PEG

IMPROVED CONTACT DESIGN (PRE BEND) 10,89 0,429 0,543 13,80 3,20 ±0,20 0,126 ±0,008 STANDOFF ABSTAND 2,100 ±0,005 53,34 ±0,13 21,27 0,837 1 8 1 8 1 8 1 8 3 X 13.97 = ( 2,325 59,06 ) 1,650 41,91 0,35 0,014 8 1 8 1 8 1 8 1 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 2,73 0,107 3,68 0,145 8,89 0,350 0,100 2,54 1,27 0,050 0,063 X2 ±0,003 X2 ±0,07 3,25 0,035 X32 ±0,003 0,400 10,16 0,950 24,13 ±0,07 1 ,60 1,500 38,10 ±0,003 0,1 28 2,050 52,07 ±0,07 0,89 2,100 53,34 0,107 2,73 2,54 0,100 1:1 prior notice. contact one of the ERNI companies MJ 8P8C, 1X4, CATEGORY 5 MOD JACK - MJR 133726 2:1 Information: Tolerances Scale All Dimensions in mm Class I (1/1) Subject to modification without A3 Designation www.ERNI.com before using. Drawing will not be updated. All rights reserved. Only for Information. To insure that th