132

? Coilcraft, Inc. 2006 Specifications subject to change without notice. Please check our website for latest information. Fixed RF Inductors – 132 Series Document 114 Document 114 Revised 03/23/06 These fixed RF coils are part of Coilcraft’s series of insert molded inductors. This precision construction technique ensures constant winding pitch, long-term stability and tight tolerance (±5%) on inductance. These high Q fixed inductors are available in standard values from 14.0 nH to 709 nH. Coilcraft Designer’s Kit M304 contains three samples each of 20 standard values plus 13 values from the 148 Series. To order, please contact Coilcraft or visit http://order.coilcraft.com. Part L 2 SRF min 3 DCR max 4 Irms 5 Lead gauge Dim A 6 L 7 number ±5% (nH) Q min 2 (MHz) (mOhms) (A) Color Turns (AWG) (in/mm) ±5% (nH) 132-01L 14.0 60@ 50 MHz 2500 2.1 4.0 Brown 1? 22 0.148/3,76 31.5 132-02L 21.0 64@ 50 MHz 2000 3.0 4.0 Red 2? 22 0.148/3,76 36.5 132-03L 28.0 68@ 50 MHz 1700 3.8 4.0 Orange 3? 22 0.148

Model 132 www.vishay.com Vishay Spectrol Revision: 12-Apr-13 1 Document Number: 57096 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1 5 / 16 " (33.3 mm) Low Cost Industrial Single Turn Wirewound, Bushing Mount Type Potentiometer FEATURES ? Suitable model for all industrial applications ? Center tap available ? Continuous rotation and mechanical stops both standard ? Large electrical angle: 352° ± 2° ?Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Sensor type ROTATIONAL, single turn wirewound Output type Output by turrets Market appliance Industrial Dimensions 1 5 / 16 " (33.3 mm) ELECTRICAL SPECIFICATIONS PARAMETER MIL-PRF-12934 TEST PROCEDURES APPLY STANDARD SPECIAL Total Resistance 5 ? to 20 k ? to 35 k ? Tolerance: 50 ?

4 CELL RUGGED & LIGHTWEIGHT ALUMINUM BATTERY HOLDERS ALUMINUM BATTERY HOLDERS 22 * 1 Single clip holds 2 batteries in place. *** 3 Clips hold 6 batteries in place. Lightweight yet strong, constructed of aircraft grade aluminum. Batteries snap-fit securely into clips. FIG. 1 FIG. 3 FIG. 4 FIG. 2 1 CELL 2 CELL BATTERY CROSS REFERENCE 137 11 138 23 169 33 170 43 IEC ANSI/NEDA MANUFACTURERS “AAA” CELL “AA” CELL “C” CELL “D” CELL “N” OR “12V” CELL LITHIUM “2/3A” OR “CR123” CELL 139 11 140 23 171 33 182 43 189 22 192 44 193 64 173 11 174 2 3* 185 22 187 33 196 4 4** 197 64 175 11 176 2 3* 186 22 190 33 200 4 4** 201 64 205 6 4*** 154 11 155 23 156 33 132 11 CR17345 5018LC 203P 1290 1290-79 REF. PAGE 31 1290-66 LR03 24A LR6 15A LR20 LR1 6LR61 1604A, 1604LC, 1 1604 7.2H5 910A 13A 14A HOLDS CAT. NO. OF FIG. NO. CELLS NO. “9 VOLT” BATTERY 2 CELL 4 CELL 3 CELL MODIFICATIONS We welcome the opportunity to quote on variations of standard items. Use our engineering service for your custom- built hold

. . . for Industry Enclosures . . . A Phoenix Mecano Company ?

CABLE TIE, BUTTON HEAD, 105 LB TENSILE STRENGTH, 9.63IN L, .22IN W, BLACK

CABLE TIE, BUTTON HEAD, 105 LB TENSILE STRENGTH, 15IN L, .22IN W, BLACK

CABLE TIE, BUTTON HEAD, 130 LB TENSILE STRENGTH, 10.51IN L, .30IN W, BLACK

CABLE TIE, BUTTON HEAD, 105 LB TENSILE STRENGTH, 9.63IN L, .22IN W, BLACK

? Freescale Semiconductor, Inc., 2005, 2006, 2007. All rights reserved. Freescale Semiconductor Technical Data Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. Document Number: MC13201 Rev. 1.1, 03/2007 MC13201 Package Information Plastic Package Case 1311-03 QFN -32 Ordering Information Device Device Marking Package MC13201 13201 QFN-32 1 Introduction The MC13201 is a short range, low power, 2.4 GHz Industrial, Scientific, and Medical (ISM) band transceivers. The MC13201 contains a complete packet data modem which is compliant with the IEEE ? 802.15.4 Standard PHY (Physical) layer. This allows the development of proprietary point-to-point and star networks based on the 802.15.4 packet structure and modulation format. For full 802.15.4 Standard compliance, the MC13202/203 and Freescale's 802.15.4 MAC software are required. When combined with an appropriate microcontroller (MCU), the MC13

? Freescale Semiconductor, Inc., 2005, 2006, 2007, 2008. All rights reserved. Freescale Semiconductor Technical Data Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. Document Number: MC13201 Rev. 1.3, 04/2008 MC13201 Package Information Plastic Package Case 1311-03 QFN -32 Ordering Information Device Device Marking Package MC13201FC 13201 QFN-32 MC13201FCR2 (Tape and Reel) 13201 QFN-32 1 Introduction The MC13201 is a short range, low power, 2.4 GHz Industrial, Scientific, and Medical (ISM) band transceivers. The MC13201 contains a complete packet data modem which is compliant with the IEEE ? 802.15.4 Standard PHY (Physical) layer. This allows the development of proprietary point-to-point and star networks based on the 802.15.4 packet structure and modulation format. For full 802.15.4 Standard compliance, the MC13202 and Freescale's 802.15.4 MAC software are required. When combined with an