1308

11.71 10.21 A A B B Open 325HL with bottom flanges (2 included) and left hinged top plate. Aluminum panels are not included. For illustration only. 7.13 .33 325HL with bottom rotating feet (4 included) 8.75 (Bottom plate length) 10.04 (Top hinged plate lenght) 9.71 SECTION A-A 6.88 (Bottom plate lenght) 8.14 (Top hinged plate lenght) .44 (Boss height) 5.76 (Top plate height) 6.82 Internal total clearance 6.00 Bottom height 7.84 SECTION B-B Hinge for top plate (mounted left or right) -Material: UV stabilized Polycarbonate Flammability UL 94 V-0 -Watertight enclosure meets or exceed Nema 4 and or IP67. PARTS INCLUDED P/N Qty. Description 352 HLT 1 352 HL Top 350 HLB 1 350 HL Bottom 8300 1 300 O-ring 1304 2 Hinge pin 7011 2 710 / 720 /920 Safty Latch 7036 2 Latch pin 1305 2 350 Flange 1306 4 350 Feet 1307 2 350 Panel hinge pin 1308 1 350 Panel hinge A 1309 1 350 Panel hinge B 6028 4 SS #10 X 5/8" Pan H/L I 352HL Ph. (626) 331-0517 Fx. (626) 331-8584 serpac.com 2009 W

DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 FAX (909) 627-7449 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 FAX (781) 575-0172 DRAWING NUMBER 13010 DATE: October 2011 STATSHIELD ? BAG, SHIELDING, METAL-OUT CONSTRUCTION, .0030" (.0762mm) ? 2011 DESCO INDUSTRIES INC. Employee Owned The bag’s material meets the required limits of ANSI/ESD S541 per ANSI/ESD S20.20. Statshield ? and Statfree ? are Registered Trademarks of Desco Industries Inc. Side Weld Seals 3/8 in. (±0.10) STATSHIELD ? METAL-OUT SERIES Specifications: Electrical Properties Typical Values Test Procedures/Method Surface Resistance: Outer Surface <10E8 ohms ANSI/ESD STM11.11 Inner Surface <10E11 ohms ANSI/ESD STM11.11 Static Shielding <25 nJ ANSI/ESD STM11.31, EIA 541 Charge Generation (nC/in 2) Teflon: -0.03 Modified Incline Plane Quartz: +0.10 Modified Incline Plane Capacitance Probe (to dissipate 1 KV) <30 volts ANSI/EI

. . . for Industry Enclosures . . . A Phoenix Mecano Company ?

EVAL BOARD FOR HMC907LP5E

1 02-2013, Rev. 0213 www.te.com ? 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. company EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. Contact Ratings Features ? Robust 1- and 2-pole contactors. ? Shunt available on 1-pole models. ? Convenient mounting plate. Coil Data Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Full Number Line Locked Resistive Maximum Horsepower Load of Volta

Adapter Coaxial Connector N Plug, Male Pin To F Plug, Male Pin

Between Series Adapters Between Series Adapters solve a variety of connection problems where connectors of different types ordinarily could not be mated together. Each adapter has a different type coupling at each end allowing for a wide variety of interconnections to fit almost all interconnection situations. All adapters are constructed of machined brass and are nickel plated. N to BNC Part Number Description Fig. No. 1303505 N Male - BNC Male 145 1313505 N Male - BNC Female 146 1323505 N Female - BNC Female 147 3311505 N Female - BNC Male 147A Fig. 145 Fig. 146 Fig. 147 Fig. 147A RoHS compliant REQUEST QUOTE REQUEST DRAWING _____________________________ N to UHF Part Number Description Fig. No. 1307505 N Male - UHF Male 148 1317505 N Male - UHF Female 149 1327505 N Female - UHF Female 150 7311505 N Female - UHF Male 151

1 LT1308A/LT1308B 1308abfa High Current, Micropower Single Cell, 600kHz DC/DC Converters ■ 5V at 1A from a Single Li-Ion Cell ■ 5V at 800mA in SEPIC Mode from Four NiCd Cells ■ Fixed Frequency Operation: 600kHz ■ Boost Converter Outputs up to 34V ■ Starts into Heavy Loads ■ Automatic Burst Mode TM Operation at Light Load (LT1308A) ■ Continuous Switching at Light Loads (LT1308B) ■ Low V CESAT Switch: 300mV at 2A ■ Pin-for-Pin Upgrade Compatible with LT1308 ■ Lower Quiescent Current in Shutdown: 1 μA (Max) ■ Improved Accuracy Low-Battery Detector Reference: 200mV ±2% ■ Available in 8-Lead SO and 14-Lead TSSOP Packages ■ GSM/CDMA Phones ■ Digital Cameras ■ LCD Bias Supplies ■ Answer-Back Pagers ■ GPS Receivers ■ Battery Backup Supplies ■ Handheld Computers The LT ? 1308A/LT1308B are micropower, fixed frequency step-up DC/DC converters that operate over a 1V to 10V input voltage range. They are improved versions of the LT1308 and are recommended for use in new designs. The LT1308A featur

1 LT1308A/LT1308B 1308abfa High Current, Micropower Single Cell, 600kHz DC/DC Converters ■ 5V at 1A from a Single Li-Ion Cell ■ 5V at 800mA in SEPIC Mode from Four NiCd Cells ■ Fixed Frequency Operation: 600kHz ■ Boost Converter Outputs up to 34V ■ Starts into Heavy Loads ■ Automatic Burst Mode TM Operation at Light Load (LT1308A) ■ Continuous Switching at Light Loads (LT1308B) ■ Low V CESAT Switch: 300mV at 2A ■ Pin-for-Pin Upgrade Compatible with LT1308 ■ Lower Quiescent Current in Shutdown: 1 μA (Max) ■ Improved Accuracy Low-Battery Detector Reference: 200mV ±2% ■ Available in 8-Lead SO and 14-Lead TSSOP Packages ■ GSM/CDMA Phones ■ Digital Cameras ■ LCD Bias Supplies ■ Answer-Back Pagers ■ GPS Receivers ■ Battery Backup Supplies ■ Handheld Computers The LT ? 1308A/LT1308B are micropower, fixed frequency step-up DC/DC converters that operate over a 1V to 10V input voltage range. They are improved versions of the LT1308 and are recommended for use in new designs. The LT1308A featur

1 LT1308A/LT1308B 1308abfa High Current, Micropower Single Cell, 600kHz DC/DC Converters ■ 5V at 1A from a Single Li-Ion Cell ■ 5V at 800mA in SEPIC Mode from Four NiCd Cells ■ Fixed Frequency Operation: 600kHz ■ Boost Converter Outputs up to 34V ■ Starts into Heavy Loads ■ Automatic Burst Mode TM Operation at Light Load (LT1308A) ■ Continuous Switching at Light Loads (LT1308B) ■ Low V CESAT Switch: 300mV at 2A ■ Pin-for-Pin Upgrade Compatible with LT1308 ■ Lower Quiescent Current in Shutdown: 1 μA (Max) ■ Improved Accuracy Low-Battery Detector Reference: 200mV ±2% ■ Available in 8-Lead SO and 14-Lead TSSOP Packages ■ GSM/CDMA Phones ■ Digital Cameras ■ LCD Bias Supplies ■ Answer-Back Pagers ■ GPS Receivers ■ Battery Backup Supplies ■ Handheld Computers The LT ? 1308A/LT1308B are micropower, fixed frequency step-up DC/DC converters that operate over a 1V to 10V input voltage range. They are improved versions of the LT1308 and are recommended for use in new designs. The LT1308A featur