10EDP

CORCOM Product Guide PC Board Mountable RFI Filters for General Purpose Applications The EDP series RFI filters provide enhanced differential mode performance for applications requiring more line-to- line protection. The EDP filters feature low leakage current for European safety requirements. This series is likewise PC board mounted and is only slightly taller than the EOP series filters. The EDP filters are also available up to 10 amps. EOP Series The EOP series RFI power line filters are general purpose filters which are effective in removing both common and differential mode noise for susceptibility applications. These filters have low leakage current for European safety requirements. The compact design allows PC mounting with minimal space requirements. Available from 1 to 10 amps, the filters provide a cost effective alternative to on board components. Specifications Maximum leakage current,each line-to-ground @ 120 VAC 60 Hz: .22 mA @ 250 VAC 50 Hz: .38 mA Hipot rating (one

High Performance Compact RFI Power Line Filters with IEC Connectors The ED series filters are more effective than general- purpose filters in applications where line-to-line and low- frequency line-to-ground noise must be controlled; for example, to bring equipment into compliance with FCC conducted emissions standards. The ED series offers significantly higher performance than comparably sized filters, especially at high frequencies, yet is in the EF series package which incorporates the IEC power line connector. Models ED1, ED1C, and ED2 have .250” terminals on load side; ED4, ED4C, ED8, and ED8C have wire leads. Models 6ED1C, 10ED1C, 6ED4C, and 6ED8C additionally incorporate a separate ground-circuit inductor to isolate the equipment chassis from power line ground at RF frequencies. Specifications Maximum leakage current,each line-to-ground @ 120 VAC 60 Hz: .22 mA @ 250 VAC 50 Hz: .38 mA Hipot rating (one minute): line-to-ground 1500 VAC line-to-line 1450 VDC Operating frequency:

21 EBP, EDP & EOP Series RFI Power Line Filters PC Board Mountable General Purpose RFI Filters 1 Dimensions are in inches and millimeters unless otherwise speci?ed. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Speci?cations subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com EOP Series Maximum leakage current each Line to Ground: EDP/EOP EBP @ 120 VAC 60 Hz: .22 mA .13 mA @250 VAC 50 Hz: .38 mA .21 mA Hipot rating (one minute): Line to Ground: 2250 VDC Line to Line: 1450 VDC Rated Voltage (max): 250 VAC Operating Frequency: 50/60 Hz Rated Current: 1 to 10A Operating Ambient Temperature Range (at rated current I r ): -10°C to +40°C In an ambient temperature (T a ) higher than +40°C the maximum operating current (I o ) is calculated as follows: I o = I r ?(85-Ta)/45 ? Enhanced differential mode performance ? Low leakage current ? Cost-effective Or