搜索
发布采购
更新日期：2024-04-01 00:04:00
09826 中文资料属性参数
- 标准包装：1
- 类别：静电控制，ESD，无尘室产品
- 家庭：接地线，接地带
- 系列：-
- 类型：软线（用于衬垫、腕带）
- 线缆类型：直形
- 软线端接：10mm 钮槽，#10 环形端子，香蕉插孔（2）
- 线缆长度：15' (4.57m)
- 导线数：1
- 带闭合：-
- 带材料：-
- 带终端：-
- 电阻（欧姆）：1M
- 尺寸：-
- 颜色：黑
- 特点：-
- 其它名称：9825R
09826 数据手册
| 数据手册 | 说明 | 数量 | 操作 |
|---|---|---|---|
 09826
|
TB-2000 March 2012 Page 1 of 4 Installation and Maintenance of ESD Mats Introduction The purpose of an ESD worksurface is to aid in the prevention of damage to ESD sensitive components and assemblies from electrostatic discharge. An ESD worksurface provides protection in the following two ways: 1. Providing an antistatic worksurface area that will limit static electricity generation. 2. Removing the charge from a conductive object placed on the worksurface. A dissipative worksurface having a surface resistance of at least 1 x 10E6, but less than 1 x 10E9 ohms is recommended by worksurface standard ANSI/ESD S4.1. Dissipative materials minimize the generation of static charges, and will dissipate a charge slow enough so that a spark will not occur. Dissipative materials are usually the preferred choice for bench top worksurfaces. Conductive materials are the quickest to remove a charge, but they can also cause damage by discharging too rapidly. Conductive materia |
4页,361K | 查看 |
|
09826
|
TB-2000 March 2012 Page 1 of 4 Installation and Maintenance of ESD Mats Introduction The purpose of an ESD worksurface is to aid in the prevention of damage to ESD sensitive components and assemblies from electrostatic discharge. An ESD worksurface provides protection in the following two ways: 1. Providing an antistatic worksurface area that will limit static electricity generation. 2. Removing the charge from a conductive object placed on the worksurface. A dissipative worksurface having a surface resistance of at least 1 x 10E6, but less than 1 x 10E9 ohms is recommended by worksurface standard ANSI/ESD S4.1. Dissipative materials minimize the generation of static charges, and will dissipate a charge slow enough so that a spark will not occur. Dissipative materials are usually the preferred choice for bench top worksurfaces. Conductive materials are the quickest to remove a charge, but they can also cause damage by discharging too rapidly. Conductive materia |
4页,361K | 查看 |
|
09826
|
TB-2000 March 2012 Page 1 of 4 Installation and Maintenance of ESD Mats Introduction The purpose of an ESD worksurface is to aid in the prevention of damage to ESD sensitive components and assemblies from electrostatic discharge. An ESD worksurface provides protection in the following two ways: 1. Providing an antistatic worksurface area that will limit static electricity generation. 2. Removing the charge from a conductive object placed on the worksurface. A dissipative worksurface having a surface resistance of at least 1 x 10E6, but less than 1 x 10E9 ohms is recommended by worksurface standard ANSI/ESD S4.1. Dissipative materials minimize the generation of static charges, and will dissipate a charge slow enough so that a spark will not occur. Dissipative materials are usually the preferred choice for bench top worksurfaces. Conductive materials are the quickest to remove a charge, but they can also cause damage by discharging too rapidly. Conductive materia |
4页,361K | 查看 |
|
0982660055
|
6 Position FFC Cable 0.020" (0.50mm) 3.00" (76.20mm) |
1页,566K | 查看 |
|
0982660061
|
6 Position FFC Cable 0.020" (0.50mm) 6.00" (152.40mm) |
1页,566K | 查看 |
|
0982660062
|
6 Position FFC Cable 0.020" (0.50mm) 6.00" (152.40mm) |
1页,566K | 查看 |
|
0982660083
|
8 Position FFC Cable 0.020" (0.50mm) 6.00" (152.40mm) |
1页,566K | 查看 |
|
0982660084
|
8 Position FFC Cable 0.020" (0.50mm) 6.00" (152.40mm) |
1页,566K | 查看 |
|
0982660105
|
10 Position FFC Cable 0.020" (0.50mm) 6.00" (152.40mm) |
1页,566K | 查看 |
|
0982660106
|
10 Position FFC Cable 0.020" (0.50mm) 6.00" (152.40mm) |
1页,566K | 查看 |